I have the dual Bendix mags on a Revmaster, some years ago I purchased the auto spark plug conversion from Revmaster, (I only did the top 4 plugs) but like you I was unable to fix the ignition noise problems with my Icom A-200 despite trying many solutions. In the end I purchased shielded wires etc. and made up a new ignition harness for the top plugs and went back to aviation plugs. A few years after that I decided to try again, this time I purchased the auto plug adapters from Great Plains (top plugs only again). These adapters don't require you to cut or alter the harness in any way. The long and the short of it is that the Great Plains adapters work very well, I now have about 110hrs on them and so far they have been trouble free.
Alan Bradtke Sent from my iPad On 20/03/2012, at 12:05 AM, Prototype Mech <prototypem...@yahoo.com> wrote: > My KR2 has a Revmaster 2100-D with a dual-mag setup using auto-plugs. From > day one, its had ignition noise problems with my Icom A-24 radio. Ive tried > multiple solutions (external wire braid on the ignition leads, different > sparkplugs, removed the p-leads) to cure the ignition noise but nothing seems > to work. I'm to the point of replacing the Solid Core ignition wires with > some automotive suppressor wire (carbon or spiral core) but I wanted to get > some input from those here on KRnet before I move forward. There is chatter > on the web about suppressor wires harming the magneto internally. > > Any thoughts? > Dave R. > _______________________________________ > Search the KRnet Archives at http://mylist.net/private/krnet/ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
