use the width top and bottom the same. Virg On Tue, 28 Mar 2006 11:57:03 +1000 "Chris Johnston" <chr...@ozdocs.net.au> writes: > I checked the KR2S plans again, and measured with dividers, ( > from the > plan view ), the difference in width between the upper and lower > longerons > at the front of the rudder post, and the top is wider than the > bottom by > about 30 percent. Yet in the assembly manual there is a > "perspective" view > which seems to show no difference in width, the KR2 plans, again > from the > plan view show no difference in width???? Confusing! > > > > > Chris Johnston > > > > RICHMOND AUSTRALIA > ----- Original Message ----- > From: "VIRGIL N SALISBURY" <virg...@juno.com> > To: <kr...@mylist.net> > Sent: Monday, March 27, 2006 2:23 PM > Subject: Re: KR> ruder post > > > > the rudder post on the K R 1 was tilted back 7 Degrees. > Taper > > front to back > > of the post was to meet the aft Fus when sprung in. From above > the Fus, > > the only > > taper was from the top of the Fus to the tip. Check the top view > of the > > plans again, Virg > > > > On Mon, 27 Mar 2006 13:06:50 +1000 "Chris Johnston" > > <chr...@ozdocs.net.au> writes: > >> I need some advice on the kr2s rudder post, it looks as > though > >> from the plans the the section of the rudder post buried in the > aft > >> fuselage must be tapered, as the top longerons are wider than > the > >> bottom longerons, but this section must also be bevelled, how far > up > >> do you run the bevel? it looks as though on the kr2, that there > is > >> no taper on the lower part of the rudder post? I have searched > the > >> archives and not found anything useful and have found no > >> construction photos either of anything usefull, but I may have > just > >> been looking in all the wrong places. > >> > >> > >> > >> > >> > >> Chris > Johnston > >> > >> > >> > >> > >> Richmond > >> Australia > >> _______________________________________ > >> Search the KRnet Archives at > >> http://www.maddyhome.com/krsrch/index.jsp > >> to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > >> please see other KRnet info at http://www.krnet.org/info.html > >> > >> > > > > > > Virgil N. Salisbury - AMSOIL > > www.lubedealer.com/salisbury > > Miami ,Fl > > > > _______________________________________ > > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
