The top and bottom longerons are the same width top and bottom. draw it out on the table and use that for the fore/aft taper in the Fus, Virg
On Mon, 27 Mar 2006 13:06:50 +1000 "Chris Johnston" <chr...@ozdocs.net.au> writes: > I need some advice on the kr2s rudder post, it looks as though > from the plans the the section of the rudder post buried in the aft > fuselage must be tapered, as the top longerons are wider than the > bottom longerons, but this section must also be bevelled, how far up > do you run the bevel? it looks as though on the kr2, that there is > no taper on the lower part of the rudder post? I have searched the > archives and not found anything useful and have found no > construction photos either of anything usefull, but I may have just > been looking in all the wrong places. > > > > > > Chris Johnston > > > > > Richmond > Australia > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
