Ken and all,
The first step as I know now is to contact the MIDO. Mine was
very helpful and supportive. They sent a package with all the documents
and instructions to fill them out. ( I think that Larry had them
available at the last gathering also) I found the inspector that I was
going to use next, Inn my case that happens to be a AB-DAR, but it could
be from MIDO,FSDO, or the EAA program of inspect for cash. He sent me a
small package of his requests for information. I combined both lists
along with any other official papers that I had already done
(registration documents in my case) Sent 1 complete copy to the MIDO for
review (mailed, reviewed, and back in my mail box in 3 calender days-this
guy is going to give the FAA a good name) I sent 2 complete copies to the
inspector. We reviewed this over the phone and I then copied him on the
MIDO comments to the package. I also re contacted the FSDO during this as
there is a little confusion on who has the finial say for test area.
During these conversations I found out that I was talking to the
inspector that would be reviewing the recommendation for the repairmans
certificate. That document is included in the original package from the
MIDO. You will want to make sure that it gets completed after the
inspection is complete but before your inspector leaves.
My inspection will proably be Wednesday or Thursday this week.
Having had all this paper work in their hands before they ever get there
I am certain will cut way down on the time it takes and the ensuing
anxiety.
I know for sure that the inspection that I will go through is
going to be very tough.( not like the sugar pill that one of our friends
got last year). But I am not afraid of that, I'm confident that I have
done a responsible
job of at very least adequate quality. I would rather have the hard
inspection and save my life then to have someone look around and say I'll
be fine. Bring on the inspector. (The Yeee -- Haaa is building)
Good Luck
Joe Horton, Coopersburg, PA.
joe.kr2s.buil...@juno.com
On Fri, 24 Jun 2005 10:46:40 -0400 ken j grevemberg
<kgrevemb...@juno.com> writes:
> Joe,
> I am building a KR2 and have never dealt with the paperwork.
> Any suggestions/help will be greatly appreciated.
>
> Thanks,
>
> Ken Grevemberg
> 304 Whitewater Lake Road
> Yamassee, SC 29686
> 864-944-5722
>
>
