I have thought of taking something like a thin steel ruler and putting 1/4" deep grooves in the foam in a 6" X 6" grid pattern before putting on the micro. That would prevent the glass from separating from the foam and also give it a little more stiffness while adding very little weight. Has anyone ever tried this? Maybe I will do some test pieces.
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of larry flesner Sent: Monday, April 26, 2004 11:27 PM To: KRnet Subject: KR> delaminations! The problem we have experienced is localized in only >one area that is already repaired, but it could happen to others who have >done what we have done. I WILL NOT be doing any hard-shelling and will >recommend against it. - Michael Pollock - Flying Velocity N173DT >Larry A Capps >Naperville, IL +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ The above "snip" would indicate to me that the problem was not in "hard-shelling" if it happened only in a localized area. From the a
