The lubricators are on the way. I hope the quarantine doesn't complicate even more the already tedious customs clearance process.
El mié., 19 ago. 2020 a las 22:27, Leonardo Marsaglia (< [email protected]>) escribió: > Thank you guys for all the replies :) > > I'll give them a try and see how it goes. > > El mié., 19 ago. 2020 a las 9:54, Todd Zuercher (<[email protected]>) > escribió: > >> I think I'd prefer a model with a pressure guage (but you could always >> add one in-line after the pump). And for Linuxcnc I'd prefer one without >> the timer features and do the timing control in Linuxcnc. >> >> Todd Zuercher >> P. Graham Dunn Inc. >> 630 Henry Street >> Dalton, Ohio 44618 >> Phone: (330)828-2105ext. 2031 >> >> -----Original Message----- >> From: Leonardo Marsaglia <[email protected]> >> Sent: Tuesday, August 18, 2020 7:06 PM >> To: Enhanced Machine Controller (EMC) <[email protected]> >> Subject: [Emc-users] OT: Anyone tried these auto lube units? >> >> [EXTERNAL EMAIL] Be sure links are safe. >> >> Hello guys, >> >> I'm about to purchase some automatic lube units for a copying lathe I'm >> retrofitting with LCNC and for the router project (which is alive again >> finally). >> >> I'm planning to use an auto lube unit like this: >> >> >> https://www.ebay.com/itm/CNC-Electromagnetic-Lubricant-Pump-Automatic-Lubricating-Oil-Pump-220V-HTS02-2L/184283971779?hash=item2ae82e40c3:g:TCMAAOSwiI1eYgJZ >> >> >> Do you have any experience with these? Should I try something a little >> more expensive just to play it safe? >> >> Thanks as always! >> >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
