I have had two of similar design in service for about 3 years now and both
seem to work just fine. Filling them is the only real nuisance as I
mounted mine in the base of the machine. Keep them very accessible if you
can.
On Tue, 18 Aug 2020 19:05:41 -0400, Leonardo Marsaglia
<[email protected]> wrote:
Hello guys,
I'm about to purchase some automatic lube units for a copying lathe I'm
retrofitting with LCNC and for the router project (which is alive again
finally).
I'm planning to use an auto lube unit like this:
https://www.ebay.com/itm/CNC-Electromagnetic-Lubricant-Pump-Automatic-Lubricating-Oil-Pump-220V-HTS02-2L/184283971779?hash=item2ae82e40c3:g:TCMAAOSwiI1eYgJZ
Do you have any experience with these? Should I try something a little
more
expensive just to play it safe?
Thanks as always!
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
