I think I'd prefer a model with a pressure guage (but you could always add one in-line after the pump). And for Linuxcnc I'd prefer one without the timer features and do the timing control in Linuxcnc.
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Leonardo Marsaglia <[email protected]> Sent: Tuesday, August 18, 2020 7:06 PM To: Enhanced Machine Controller (EMC) <[email protected]> Subject: [Emc-users] OT: Anyone tried these auto lube units? [EXTERNAL EMAIL] Be sure links are safe. Hello guys, I'm about to purchase some automatic lube units for a copying lathe I'm retrofitting with LCNC and for the router project (which is alive again finally). I'm planning to use an auto lube unit like this: https://www.ebay.com/itm/CNC-Electromagnetic-Lubricant-Pump-Automatic-Lubricating-Oil-Pump-220V-HTS02-2L/184283971779?hash=item2ae82e40c3:g:TCMAAOSwiI1eYgJZ Do you have any experience with these? Should I try something a little more expensive just to play it safe? Thanks as always! _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
