Thanks Doug
What kind of problems could we expect in a room with spec «"Typical > 40dB of shielding effectiveness"? Noise from sources outside the chamber? Not possible to make an ambient measurement without a lot of noise coming in from the outside environment? Best regards Amund Fra: Douglas Powell Sendt: 28. mars 2023 20:21 Til: [email protected] Emne: Re: [PSES] Comtest Architectural Shielding Amund, I remain a little skeptical of this type of shielding and I personally would want to witness some testing where these shielding claims are made. It may be useful for E-fields, but my suspicion lies with H-fields. Some years ago, there was a company that claimed their conductive spray paints were all you need and you get "perfect" shielding. Bottom line is "your mileage may vary". The shield room I was involved with some years ago had a steel outer skin and inner skin, laminated on both sides on high density particle board and sealed at every seam. This was able to achieve shielding effectiveness of 100 dB plus up to 3 GHz. If all you need is the "Typical > 40dB of shielding effectiveness", then maybe this will work for you. Best of luck, -Doug Douglas E Powell Laporte, Colorado USA <mailto:[email protected]> [email protected] <https://www.linkedin.com/in/coloradocomplianceguy/> LinkedIn (UTC -06:00, US-MDT) On Tue, Mar 28, 2023 at 11:33 AM Amund Westin <[email protected] <mailto:[email protected]> > wrote: Please check out the datasheet attached. Anyone here in the forum that have experience with this type of shielding? The goal is => a manufacturer wants to build a pre-testing site in-house (5m x 2m x 2m). Thanks for any comments. BR Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
