Hi David,
Thank you that is very useful. I’ve seen OEM specs for Ford and GM and, as you observe, their requirements often exceed R10 and CISPR 25. It was a rude shock to that particular client… All the best and merry xmas James James Pawson The EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 From: David Schaefer <[email protected]> Sent: 17 December 2021 14:22 To: [email protected] Subject: Re: [PSES] US vehicle EMC regulations Hi James, In the USA vehicles are covered by Federal Motor Vehicle Safety Standards (FMVSS), which do not address EMC/EMI. Part 15.103 excludes vehicles, except for the general clause that they cannot cause harmful interference. The normal intentional testing and certification would be required for a radio. All the automotive manufacturers have their own internal specifications, usually far exceeding the requirements from ECE R10. Thanks, David Schaefer Technical Manager Element Materials Technology 9349 W Broadway Ave Brooklyn Park , MN 55445 , United States O <tel:+1%20612%20638%205136> +1 612 638 5136 ext. 10461 <mailto:[email protected]> [email protected] www.element.com <https://www.linkedin.com/organization-guest/company/element-materials-technology?challengeId=AQFf9AemZ4SobwAAAXOQwivOsnkHiTt2ByoCkOxVQjOGOjRlivicVgYlN1dz5QXjId9bpa0keWzfVxhl8KPj78uD6-S6nfqRsg&submissionId=e49e0dc0-96a3-2516-27fa-ee2e8c42b177> <https://twitter.com/ElementTesting/> <https://elementmaterials.eu.qualtrics.com/jfe/form/SV_3xQqm84s6IydI5D> From: James Pawson (U3C) [mailto:[email protected]] Sent: Friday, December 17, 2021 6:06 AM To: [email protected] Subject: [PSES] US vehicle EMC regulations CAUTION:This email originated from outside of Element Materials Technology. DO NOT click links or open attachments unless you recognize the sender and know the content is safe. Please contact IT Service Desk if you are in any doubt about this email. Hi all, I’m familiar with UNECE Regulation 10 that covers EMC for vehicles and Electronic Sub Assemblies in Europe. Is there an equivalent set of vehicle EMC standards for the US? Presumably CFR47 Part 15 applies to unintentional and intentional radiators as well? Thanks and all the best James James Pawson The EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 _____ <https://www.avg.com/internet-security> This email has been checked for viruses by AVG antivirus software. www.avg.com <https://www.avg.com/internet-security> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > Disclaimer This email is sent on behalf of Element Materials Technology Group Limited or the relevant group company with which you are dealing (together, Element). Element Materials Technology Group Limited is a limited company registered in England and Wales with registered number 09915743. Its registered office is at 5 Fleet Place, London, England, United Kingdom, EC4M 7RD and its principal place of business is at 3rd Floor, Davidson Building, 5 Southampton Street, London, United Kingdom, WC2E 7HA. Element cannot accept responsibility for any loss or damage sustained as a result of viruses or malware and the recipient must ensure that the email and attachments are virus and malware free. Emails and attachments are opened at your own risk. The information transferred is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Transmission of this email is not intended to waive confidentiality and/or privilege. The contents of this email are subject to contract and do not contain an offer that is capable of acceptance. Unless otherwise agreed in writing with you, the Element Standard Terms of Business for the relevant group company apply in respect of any services provided to you, including advice given to you by email. The Standard Terms of Business are available on request and can be found at https://www.element.com/terms/terms-and-conditions For information about how we process data and monitor communications please see our Privacy statement at https://www.element.com/terms/privacy-statement - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > -- This email has been checked for viruses by AVG. https://www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
