CISPR 25 is used for equipment-level emissions (CE & RE).  This is for the
purpose of protecting on-board radio reception and has nothing to do with
the FCC. ISO 11452-X provide a variety of immunity requirements. And, as
noted previously, various OEMS have their own internal requirements.  The
only FCC overview of any of this concerns SAE J551, where they measure
vehicle-level emissions at ten meters separation from the vehicle, for the
protection of roadside licensed broadcast receivers.

Ken Javor
Phone: (256) 650-5261



From: "James Pawson (U3C)" <[email protected]>
Reply-To: "James Pawson (U3C)" <[email protected]>
Date: Fri, 17 Dec 2021 12:05:33 -0000
To: <[email protected]>
Subject: [PSES] US vehicle EMC regulations

Hi all,
 
I¹m familiar with UNECE Regulation 10 that covers EMC for vehicles and
Electronic Sub Assemblies in Europe.
 
Is there an equivalent set of vehicle EMC standards for the US?
 
Presumably CFR47 Part 15 applies to unintentional and intentional radiators
as well?
 
Thanks and all the best
James
 
 
 
James Pawson
The EMC Problem Solver
 
Unit 3 Compliance Ltd
EMC : Environmental & Vibration : Electrical Safety : CE & UKCA :
Consultancy
 
www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/>   |
[email protected] <mailto:[email protected]>
+44(0)1274 911747  |  +44(0)7811 139957
2 Wellington Business Park, New Lane, Bradford, BD4 8AL
Registered in England and Wales # 10574298
 
 



 <https://www.avg.com/internet-security> This email has been checked for
viruses by AVG antivirus software.
www.avg.com <https://www.avg.com/internet-security>
  <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in
well-used formats), large files, etc.

Website:      http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html>
List rules:     http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher  <[email protected]>
David Heald <[email protected]>



-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to