Hi Andy, Someone on anothergroup mentioned sending P; to the KPA500 would turn the amp on provided to main power switch was on. Can you confirm that?
Reason is I want to make sure the Node Red flow I had mentioned is programmed correctly. I use Wake on Lan with the KPA1500 successfully. Thanks Dave wo2x Sent from my iPad > On Oct 9, 2020, at 8:58 PM, Andy Durbin <[email protected]> wrote: > > Sorry - cut/paste error - should be: > > If a KAT500 is powered but off it will respond to command ps; with PS0; > If a KAT500 is powered and on it will respond to command ps; with PS1; > If a KAT500 is not powered it will not respond to ps; > > Andy, k3wyc > ________________________________ > From: Andy Durbin > Sent: Friday, October 9, 2020 5:51 PM > To: [email protected] <[email protected]> > Subject: KAT500 remote > > "I use the KAT500 remote software and it works great. I have only one problem > with it, I can not tell if the power is on or off." > > If a KAT500 is powered but off it will respond to command ps; with PS0; > If a KAT500 is powered and on it will respond to command ps; with PS1; > If a KAT500 is not powered it will not on it will not respond to ps; > > Powered status can also be found by checking the response to ; > No response if not powered > ; response if powered. > > Hopefully any remote control software you use will be smart enough to apply > these tests and indicate the result. > > Andy, k3wyc > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
