Sorry - cut/paste error - should be: If a KAT500 is powered but off it will respond to command ps; with PS0; If a KAT500 is powered and on it will respond to command ps; with PS1; If a KAT500 is not powered it will not respond to ps;
Andy, k3wyc ________________________________ From: Andy Durbin Sent: Friday, October 9, 2020 5:51 PM To: [email protected] <[email protected]> Subject: KAT500 remote "I use the KAT500 remote software and it works great. I have only one problem with it, I can not tell if the power is on or off." If a KAT500 is powered but off it will respond to command ps; with PS0; If a KAT500 is powered and on it will respond to command ps; with PS1; If a KAT500 is not powered it will not on it will not respond to ps; Powered status can also be found by checking the response to ; No response if not powered ; response if powered. Hopefully any remote control software you use will be smart enough to apply these tests and indicate the result. Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
