On 16/07/2025 10:15, Laurentiu Palcu wrote: > DCIF is the i.MX94 Display Controller Interface which is used to > drive a TFT LCD panel or connects to a display interface depending > on the chip configuration. > > Signed-off-by: Laurentiu Palcu <laurentiu.pa...@oss.nxp.com>
... > + > + interrupts: > + items: > + - description: > + Interrupt output for CPU domain 0 (controlled by common registers > group). > + - description: > + Interrupt output for CPU domain 1 (controlled by background layer > registers group). > + - description: > + Interrupt output for CPU domain 2 (controlled by foreground layer > registers group). Keep these in one line with description, by dropping redundant part "Interrupt output for". > + > + interrupt-names: > + items: > + - const: common > + - const: bg_layer > + - const: fg_layer > + > + clocks: > + items: > + - description: APB bus clock > + - description: AXI bus clock > + - description: Pixel clock > + > + clock-names: > + items: > + - const: apb > + - const: axi > + - const: pix > + > + power-domains: > + maxItems: 1 > + > + nxp,blk-ctrl: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: A phandle which points to NXP displaymix blk-ctrl. Describe for what purpose (from hardware point of view) With these improvements: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org> > + > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: Display Pixel Interface(DPI) output port > + Best regards, Krzysztof
