On Wed, Jul 16, 2025 at 11:15:10AM +0300, Laurentiu Palcu wrote:
> DCIF is the i.MX94 Display Controller Interface which is used to
> drive a TFT LCD panel or connects to a display interface depending
> on the chip configuration.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.pa...@oss.nxp.com>
> ---
> .../bindings/display/imx/nxp,imx94-dcif.yaml | 93 +++++++++++++++++++
> 1 file changed, 93 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
> b/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
> new file mode 100644
> index 0000000000000..207ddf0f550df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2025 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/nxp,imx94-dcif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX94 Display Control Interface (DCIF)
> +
> +maintainers:
> + - Laurentiu Palcu <laurentiu.pa...@oss.nxp.com>
> +
> +description:
> + The Display Control Interface(DCIF) is a system master that fetches
> graphics
> + stored in memory and displays them on a TFT LCD panel or connects to a
> + display interface depending on the chip configuration.
> +
> +properties:
> + compatible:
> + const: nxp,imx94-dcif
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + items:
> + - description:
> + Interrupt output for CPU domain 0 (controlled by common registers
> group).
> + - description:
> + Interrupt output for CPU domain 1 (controlled by background layer
> registers group).
> + - description:
> + Interrupt output for CPU domain 2 (controlled by foreground layer
> registers group).
> +
> + interrupt-names:
> + items:
> + - const: common
> + - const: bg_layer
> + - const: fg_layer
> +
> + clocks:
> + items:
> + - description: APB bus clock
> + - description: AXI bus clock
> + - description: Pixel clock
dupicated information with clock-names.
maxItems: 3
If clock-names provided, clocks genernally just need maxItems except description
can provide more information than clock names.
Frank
> +
> + clock-names:
> + items:
> + - const: apb
> + - const: axi
> + - const: pix
> +
> + power-domains:
> + maxItems: 1
> +
> + nxp,blk-ctrl:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: A phandle which points to NXP displaymix blk-ctrl.
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Display Pixel Interface(DPI) output port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + display-controller@4b120000 {
> + compatible = "nxp,imx94-dcif";
> + reg = <0x0 0x4b120000 0x0 0x300000>;
> + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "common", "bg_layer", "fg_layer";
> + clocks = <&scmi_clk 69>, <&scmi_clk 70>, <&dispmix_csr 0>;
> + clock-names = "apb", "axi", "pix";
> + assigned-clocks = <&dispmix_csr 0>;
> + assigned-clock-parents = <&ldb_pll_pixel>;
> + power-domains = <&scmi_devpd 11>;
> + nxp,blk-ctrl = <&dispmix_csr>;
> +
> + port {
> + dcif_out: endpoint {
> + remote-endpoint = <&ldb_in>;
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
