On Wed, Jul 16, 2025 at 11:15:12AM +0300, Laurentiu Palcu wrote:
> Add display controller and LDB support in imx943.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.pa...@oss.nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx943.dtsi | 56 ++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi
> b/arch/arm64/boot/dts/freescale/imx943.dtsi
> index 657c81b6016f2..db00a94812e18 100644
> --- a/arch/arm64/boot/dts/freescale/imx943.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
> @@ -148,7 +148,7 @@ l3_cache: l3-cache {
> };
> };
>
> - clock-ldb-pll-div7 {
> + clock_ldb_pll_div7: clock-ldb-pll-div7 {
> compatible = "fixed-factor-clock";
> #clock-cells = <0>;
> clocks = <&scmi_clk IMX94_CLK_LDBPLL>;
> @@ -173,10 +173,64 @@ dispmix_csr: syscon@4b010000 {
>
> lvds_csr: syscon@4b0c0000 {
> compatible = "nxp,imx94-lvds-csr", "syscon";
Did you update nxp,imx94-lvds-csr's binding doc to allow add child node
ldb@4 ?
> + #address-cells = <1>;
> + #size-cells = <1>;
> reg = <0x0 0x4b0c0000 0x0 0x10000>;
reg should be second property. add address-cells after reg
> clocks = <&scmi_clk IMX94_CLK_DISPAPB>;
> #clock-cells = <1>;
> power-domains = <&scmi_devpd IMX94_PD_DISPLAY>;
> +
> + ldb: ldb@4 {
> + compatible = "fsl,imx94-ldb";
> + #address-cells = <1>;
> + #size-cells = <0>;
the same here.
Frank
> + reg = <0x4 0x4>, <0x8 0x4>;
> + reg-names = "ldb", "lvds";
> + clocks = <&lvds_csr
> IMX94_CLK_DISPMIX_LVDS_CLK_GATE>;
> + clock-names = "ldb";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + lvds_in: endpoint {
> + remote-endpoint =
> <&dcif_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> + };
> + };
> + };
> +
> + dcif: display-controller@4b120000 {
> + compatible = "nxp,imx94-dcif";
> + reg = <0x0 0x4b120000 0x0 0x300000>;
> + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "common", "bg_layer", "fg_layer";
> + clocks = <&scmi_clk IMX94_CLK_DISPAPB>,
> + <&scmi_clk IMX94_CLK_DISPAXI>,
> + <&dispmix_csr IMX94_CLK_DISPMIX_CLK_SEL>;
> + clock-names = "apb", "axi", "pix";
> + assigned-clocks = <&dispmix_csr
> IMX94_CLK_DISPMIX_CLK_SEL>;
> + assigned-clock-parents = <&clock_ldb_pll_div7>;
> + power-domains = <&scmi_devpd IMX94_PD_DISPLAY>;
> + nxp,blk-ctrl = <&dispmix_csr>;
> + status = "disabled";
> +
> + port {
> + dcif_out: endpoint {
> + remote-endpoint = <&lvds_in>;
> + };
> + };
> };
> };
> };
> --
> 2.34.1
>
