Philip,

Thank you for letting me using your images. I tried both of them with the *dd
*command, it took me around 2000 seconds (30 mins) each and after using
them on the board I get the following message via the UART:

*U-Boot SPL 2014.01 (Jan 09 2015 - 20:24:45)*
*mmc boot*
*reading fpga.bin*
*spl: error reding image fpga.bin, err - -1*
*reading system.dtb*
*spl: error reading image system.dtb, err - -1*
*reading u-boot.img*
*spl: error reading image u-boot.img, err - -1*
*### ERROR ### Please RESET the board ###*

I got the above message for sdimage-8G-zc702.direct. I get no message for
the other image.

What am I doing wrong?

On Fri, Mar 13, 2015 at 11:22 AM, Philip Balister <phi...@balister.org>
wrote:

> On 03/13/2015 01:17 PM, Alireza Khodamoradi wrote:
> > Hello everyone,
> >
> > I'm going through the instructions from here:
> >
> > http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
>
> I should go over those carefully, but in the mentime I have some images
> built for the zedbaord here:
>
> https://www.dropbox.com/sh/yfbpj63pcenqatr/AAAt0s3xFXs47I7q5pNopheHa?dl=0
>
> Take the zedboard one, uncompress it and write it to an sd card. Be sure
> to unmount (not eject) the sd card and run:
>
> sudo dd if=sdimage-8G-zedboard.direct of=/dev/sdX
>
> where sdx is the device the sd card is on.
>
> Philip
>
> >
> > to get a working image with gnu radio for my zedboard.
> >
> > Unfortunately I can't get the board to boot with this image. I was
> > wondering if someone can help me.
> >
> > what I tried so far ( all failed - can't boot from the SDCard):
> >
> > - default settings in the instructions
> > - renaming u-boot.bin to boot.bin
> > - renaming u-boot.bin to BOOT.BIN
> > - renaming uImage--zedboard-zynq7.dtb to devicetree.dtb
> > - I tried command line as well as gparted gui.
> >
> > what I checked:
> >
> > - download a linux from XillyBus and boot the board with SDCard -> works
> >
> > v/r
> > Alireza
> >
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > Discuss-gnuradio@gnu.org
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to