On 03/13/2015 01:17 PM, Alireza Khodamoradi wrote: > Hello everyone, > > I'm going through the instructions from here: > > http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
I should go over those carefully, but in the mentime I have some images built for the zedbaord here: https://www.dropbox.com/sh/yfbpj63pcenqatr/AAAt0s3xFXs47I7q5pNopheHa?dl=0 Take the zedboard one, uncompress it and write it to an sd card. Be sure to unmount (not eject) the sd card and run: sudo dd if=sdimage-8G-zedboard.direct of=/dev/sdX where sdx is the device the sd card is on. Philip > > to get a working image with gnu radio for my zedboard. > > Unfortunately I can't get the board to boot with this image. I was > wondering if someone can help me. > > what I tried so far ( all failed - can't boot from the SDCard): > > - default settings in the instructions > - renaming u-boot.bin to boot.bin > - renaming u-boot.bin to BOOT.BIN > - renaming uImage--zedboard-zynq7.dtb to devicetree.dtb > - I tried command line as well as gparted gui. > > what I checked: > > - download a linux from XillyBus and boot the board with SDCard -> works > > v/r > Alireza > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
