Hi,
The problem is since Im not able to install it Im not able to go to the
single user mode.
Is this problem due to the way Im burning it on to the USB stick or
could something be wrong with the way the image was created?
Vandana
To: "Selbak, Rolla N" <rolla.n.sel...@intel.com>, Vandana Sasidharan
<vandana.sasidha...@tcs.com>, "dev@moblin.org" <dev@moblin.org>
From: "Selbak, Rolla N" <rolla.n.sel...@intel.com>
Date: 02/19/2010 11:04PM
Subject: Re: [Moblin Dev] Unable to boot the USB image created using
MIC2
Also, if that doesn't work, boot in single-user...boot up to the
kernel...then run 'X-configure' to automatically create an
xorg.conf...then use that xorg.conf to try and 'startx'...
I suspect the issue might be that...but I can't be sure until we at
least assert that you can boot up to the kernel...
rs
On 2/19/10 9:21 AM, "Selbak, Rolla N" <rolla.n.sel...@intel.com>
wrote:
Ok try this....
Boot from single-user mode...see if the kernel comes up...then
'startx'...
To boot to single-user, when the install menu comes up, press
'escape', then add the word 'Single' in the boot options...
rs
On 2/19/10 3:19 AM, "Vandana Sasidharan"
<vandana.sasidha...@tcs.com> wrote:
Hi,
I initially used the command
"sudo dd
if=moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg of=/dev/sdb
"
to burn the image to the USB stick.
After Selbak's suggestion I also tried the
"moblin-image-writer -c
moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg "
but both give me only the blinking cursor on the black screenwhen I
try to boot from the USB stick.
I tried to install the image from the USB stick to a hard disk it
gives me the error:
"Waiting for system to settle before starting
installation...
19:09:54 Fatal Error: X startup failed
/usr/sbin/liveinst: line 90: kill: ' ' : not a pid
or valid job spec
INIT: no more processes left in this runlevel"
I haven't tried the LiveCD yet.
The command I used to create the image in the first place is
"sudo moblin-image-creator --verbose --debug
--config=2.1-preview-ivi-noiegd.ks --format=liveusb --cache=mycache"
Any help????
Thanks
Vandana
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
Moblin dev Mailing List
dev@moblin.org
To manage or unsubscribe from this mailing list visit:
[1]http://lists.moblin.org/listinfo/dev or your user account on
[2]http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
[3]http://moblin.org/community/mailing-lists
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
References
1. http://lists.moblin.org/listinfo/dev
2. http://moblin.org/
3. http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
dev@moblin.org
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
