Try one of these workarounds: 1) Enter single mode of the installed OS, yum update kernel-ivi to 2.6.31.6-44.1(repo has been updated) and install pkg xorg-x11-server-Xorg-setuid. Reboot should make X boot. 2) Enter single mode of the installed OS, yum update kernel-ivi to 2.6.31.6-44.1 and chmod +s /usr/bin/Xorg. Reboot should make X boot. 3) modify the .ks file by adding "xorg-x11-server-Xorg-setuid" in Package section, and then re-create the image using MIC2(repo has been updated with new kernel 2.6.31.6-44.1). This should result in workable non-iegd image, both live boot and real boot after installation.
Thanks, Yanshuang >-----Original Message----- >From: dev-boun...@moblin.org [mailto:dev-boun...@moblin.org] On Behalf Of >Vandana Sasidharan >Sent: 2010年2月22日 20:44 >To: Selbak, Rolla N; dev@moblin.org >Subject: Re: [Moblin Dev] Unable to boot the USB image created using MIC2 > > Im able to go to the single user mode using the 'tab'. Will do as > selbak suggested with respect to the xorg.conf file and update. > Thanks > Vandana > > To: Vandana Sasidharan <vandana.sasidha...@tcs.com>, > "dev@moblin.org" <dev@moblin.org> > From: "Selbak, Rolla N" <rolla.n.sel...@intel.com> > Date: 02/22/2010 12:58PM > Subject: Re: [Moblin Dev] Unable to boot the USB image created using > MIC2 > You can go into Single user mode without installing by doing: > When you boot up the livecd, once you see the boot menu, press > 'tab'... > It will allow you to add the word 'single' to the booting > command-line (or any other run-level you like)... > That will put you single-user mode... > Also, I am taking look at the kernel again and making sure the IEGD > code is out of there...seems like there is a bug where if the IEGD > patch is applied, but the config is disabled, it won't allow Vesa to > run correctly... > rs > On 2/21/10 9:00 PM, "Vandana Sasidharan" > <vandana.sasidha...@tcs.com> wrote: > Hi, > The problem is since Im not able to install it Im not able to go to > the single user mode. > Is this problem due to the way Im burning it on to the USB stick or > could something be wrong with the way the image was created? > Vandana > To: "Selbak, Rolla N" <rolla.n.sel...@intel.com>, Vandana Sasidharan > <vandana.sasidha...@tcs.com>, "dev@moblin.org" <dev@moblin.org> > From: "Selbak, Rolla N" <rolla.n.sel...@intel.com> > Date: 02/19/2010 11:04PM > Subject: Re: [Moblin Dev] Unable to boot the USB image created using > MIC2 > Also, if that doesn't work, boot in single-user...boot up to the > kernel...then run 'X-configure' to automatically create an > xorg.conf...then use that xorg.conf to try and 'startx'... > I suspect the issue might be that...but I can't be sure until we at > least assert that you can boot up to the kernel... > rs > On 2/19/10 9:21 AM, "Selbak, Rolla N" <rolla.n.sel...@intel.com> > wrote: > Ok try this.... > Boot from single-user mode...see if the kernel comes up...then > 'startx'... > To boot to single-user, when the install menu comes up, press > 'escape', then add the word 'Single' in the boot options... > rs > On 2/19/10 3:19 AM, "Vandana Sasidharan" > <vandana.sasidha...@tcs.com> wrote: > Hi, > I initially used the command > "sudo dd > if=moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg of=/dev/sdb > " > to burn the image to the USB stick. > After Selbak's suggestion I also tried the > "moblin-image-writer -c > moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg " > but both give me only the blinking cursor on the black screenwhen I > try to boot from the USB stick. > I tried to install the image from the USB stick to a hard disk it > gives me the error: > "Waiting for system to settle before starting > installation... > 19:09:54 Fatal Error: X startup failed > /usr/sbin/liveinst: line 90: kill: ' ' : not a pid > or valid job spec > INIT: no more processes left in this runlevel" > I haven't tried the LiveCD yet. > The command I used to create the image in the first place is > "sudo moblin-image-creator --verbose --debug > --config=2.1-preview-ivi-noiegd.ks --format=liveusb --cache=mycache" > Any help???? > Thanks > Vandana > =====-----=====-----===== > Notice: The information contained in this e-mail > message and/or attachments to it may contain > confidential or privileged information. If you are > not the intended recipient, any dissemination, use, > review, distribution, printing or copying of the > information contained in this e-mail message > and/or attachments to it are strictly prohibited. If > you have received this communication in error, > please notify us by reply e-mail or telephone and > immediately and permanently delete the message > and any attachments. Thank you > _______________________________________________ > Moblin dev Mailing List > dev@moblin.org > To manage or unsubscribe from this mailing list visit: > [1]http://lists.moblin.org/listinfo/dev or your user account on > [2]http://moblin.org once logged in. > For more information on the Moblin Developer Mailing lists visit: > [3]http://moblin.org/community/mailing-lists > =====-----=====-----===== > Notice: The information contained in this e-mail > message and/or attachments to it may contain > confidential or privileged information. If you are > not the intended recipient, any dissemination, use, > review, distribution, printing or copying of the > information contained in this e-mail message > and/or attachments to it are strictly prohibited. If > you have received this communication in error, > please notify us by reply e-mail or telephone and > immediately and permanently delete the message > and any attachments. Thank you > >=====-----=====-----===== >Notice: The information contained in this e-mail >message and/or attachments to it may contain >confidential or privileged information. If you are >not the intended recipient, any dissemination, use, >review, distribution, printing or copying of the >information contained in this e-mail message >and/or attachments to it are strictly prohibited. If >you have received this communication in error, >please notify us by reply e-mail or telephone and >immediately and permanently delete the message >and any attachments. Thank you > >References > > 1. http://lists.moblin.org/listinfo/dev > 2. http://moblin.org/ > 3. http://moblin.org/community/mailing-lists >_______________________________________________ >Moblin dev Mailing List >dev@moblin.org > >To manage or unsubscribe from this mailing list visit: >http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org >once >logged in. > >For more information on the Moblin Developer Mailing lists visit: >http://moblin.org/community/mailing-lists _______________________________________________ Moblin dev Mailing List dev@moblin.org To manage or unsubscribe from this mailing list visit: http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
