On Tue, 28 August 2001, dman wrote:
>
> On Tue, Aug 28, 2001 at 07:07:44AM -0700, [EMAIL PROTECTED] wrote:
> | In my ongoing effort to put a second NIC in my computer I have
> | purchased a new NIC, an EtherFast 10/100 version 5. However, Linux
> | or my box doesn't see the NIC enough to give it an IRQ number.
> | Everything else seems in order when I pull up cat /proc/pci, except
> | there is no IRQ number... I'm trying to use the tulip driver that
> | came w/ the 2.4.9 kernel, tulip.c version 0.9.15-pre6
>
> What is the relevant output from dmesg regarding the NIC? I'm curious
> as to what might have changed between rev4.1 and rev5. (I have a
> rev4.1 and a rev2 card)
>
> -D
Here's the info that looks relevant...
from cat /proc/pci:
...
Bus 0, device 20, function 0:
Ethernet controller: PCI device 1317:0984 (Bridgecom, Inc) (rev 17).
Master Capable. Latency=66. Min Gnt=254.Max Lat=255.
I/O at 0x1000 [0x10ff].
Non-prefetchable 32 bit memory at 0x10000000 [0x100003ff]
from dmesg:
...
PCI: BIOS32 entry (0xc00f7850) in high memory, cannot use.
PCI: Using configuration type 1
PCI: Probing PCI hardware
got res[1000:10ff] for resource 0 of PCI device 1317:0984 (Bridgecom, Inc)
got res[10000000:100003ff] for resource 1 of PCI device 1317:0984 (Bridgecom,
Inc)
...
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
-------------------------------------------------------------
Sign up for ICQmail at http://www.icq.com/icqmail/signup.html
