It shouldn’t chip from the countersink bit. It’s just an easier way to mask right up to the edge of the hole.
Sent from my iPhone > On Aug 27, 2021, at 4:43 PM, Wade Glew via CnC-List <cnc-list@cnc-list.com> > wrote: > > > By mask over the top I'm guessing you're saying cover the hole with masking > tape then use the countersign bit? Does that prevent chipping? > Wade > >> On Fri, Aug 27, 2021, 13:53 Dave S via CnC-List, <cnc-list@cnc-list.com> >> wrote: >> 100%, + mask over the top before you countersink. If you have a small >> syringe, you can inject the material which is a little bit easier. >> >> Dave >> >> >>> On Fri, 27 Aug 2021 at 12:16, svrebeccaleah via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> Counter sink top and bottom, tape over bottom of hole. Then fill with >>> thickened epoxy. I go for about the consistency of ketchup. Without the >>> counter sink. It will crack over time. >>> >>> Doug >>> >>> >>> >>> Sent from my T-Mobile 4G LTE Device >>> >>> >>> -------- Original message -------- >>> From: Wade Glew via CnC-List <cnc-list@cnc-list.com> >>> Date: 8/27/21 09:00 (GMT-08:00) >>> To: Stus-List <cnc-list@cnc-list.com> >>> Cc: Wade Glew <wadeg...@gmail.com> >>> Subject: Stus-List filling holes in coachtop >>> >>> Hi all, >>> >>> On my 33-MK 2, I want to move the coach top winches about 12-18 inches from >>> their current location. The site I'm moving them to is a designated >>> location by design and the coach top is round and flat in the new location >>> to allow a winch placement. My question is, can I just fill the old holes >>> with unthickened epoxy or ............ what would be recommended? >>> >>> thanks for your thoughts >>> >>> >>> Wade >>> Oh Boy, 33 MK 2 >>> Thanks to all of the subscribers that contributed to the list to help with >>> the costs involved. If you want to show your support to the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >>> Stu >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
