By mask over the top I'm guessing you're saying cover the hole with masking tape then use the countersign bit? Does that prevent chipping? Wade
On Fri, Aug 27, 2021, 13:53 Dave S via CnC-List, <cnc-list@cnc-list.com> wrote: > 100%, + mask over the top before you countersink. If you have a small > syringe, you can inject the material which is a little bit easier. > > Dave > > > On Fri, 27 Aug 2021 at 12:16, svrebeccaleah via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Counter sink top and bottom, tape over bottom of hole. Then fill with >> thickened epoxy. I go for about the consistency of ketchup. Without the >> counter sink. It will crack over time. >> >> Doug >> >> >> >> Sent from my T-Mobile 4G LTE Device >> >> >> -------- Original message -------- >> From: Wade Glew via CnC-List <cnc-list@cnc-list.com> >> Date: 8/27/21 09:00 (GMT-08:00) >> To: Stus-List <cnc-list@cnc-list.com> >> Cc: Wade Glew <wadeg...@gmail.com> >> Subject: Stus-List filling holes in coachtop >> >> Hi all, >> >> On my 33-MK 2, I want to move the coach top winches about 12-18 >> inches from their current location. The site I'm moving them to is a >> designated location by design and the coach top is round and flat in the >> new location to allow a winch placement. My question is, can I just fill >> the old holes with unthickened epoxy or ............ what would be >> recommended? >> >> thanks for your thoughts >> >> >> Wade >> Oh Boy, 33 MK 2 >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
