My mistake on the number. Good catch.
From: Gary Russell via CnC-List
Sent: Thursday, December 14, 2017 3:55 PM
To: C&C List
Cc: Gary Russell
Subject: Re: Stus-List Window replacement
Note: I used VHB 4991 (0.090"), not 4941.
Gary
~~~~~~~_/)~~~~~~
On Thu, Dec 14, 2017 at 1:51 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com>
wrote:
This might be why 3M recommends the 5952:
a.. Creates a permanent seal against water, moisture and more by offering
better gap filling capabilities
That's in the 5952 description on the 3M site. It does not appear in the
4941 description. Could be the 5952 is more closed cell foam than the 4941.
Dennis C.
On Thu, Dec 14, 2017 at 12:41 PM, Matthew L. Wolford via CnC-List
<cnc-list@cnc-list.com> wrote:
Incidentally, I noted in a previous e-mail that a 3M rep I talked to (by
calling in) recommended 5952 over 4941. I just inquired again – this time by
e-mail. 3M responded that that it recommends the 59XX series for this
application. For what it’s worth.
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
--------------------------------------------------------------------------------
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
