I also used the 4991 tape for the expansion properties of the fiberglass vs plexiglass.
Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy POYC Rebecca Leah Lf39 -------- Original message --------From: Gary Russell via CnC-List <cnc-list@cnc-list.com> Date: 12/14/17 12:55 (GMT-08:00) To: C&C List <cnc-list@cnc-list.com> Cc: Gary Russell <captnga...@gmail.com> Subject: Re: Stus-List Window replacement Note: I used VHB 4991 (0.090"), not 4941.Gary ~~~~~~~_/)~~~~~~ On Thu, Dec 14, 2017 at 1:51 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> wrote: This might be why 3M recommends the 5952: Creates a permanent seal against water, moisture and more by offering better gap filling capabilitiesThat's in the 5952 description on the 3M site. It does not appear in the 4941 description. Could be the 5952 is more closed cell foam than the 4941. Dennis C. On Thu, Dec 14, 2017 at 12:41 PM, Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com> wrote: Incidentally, I noted in a previous e-mail that a 3M rep I talked to (by calling in) recommended 5952 over 4941. I just inquired again – this time by e-mail. 3M responded that that it recommends the 59XX series for this application. For what it’s worth. _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
