3/16 to 1/4 all the way around. I also bevel the the plexiglass a little. 

Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy POYC Rebecca Leah Lf39
-------- Original message --------From: "Matthew L. Wolford via CnC-List" 
<cnc-list@cnc-list.com> Date: 12/14/17  03:03  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: "Matthew L. Wolford" <wolf...@erie.net> Subject: Re: 
Stus-List Window replacement 



Thanks.  3/16 to 1/4 inch total (adding half that amount top 
and bottom, and side to side) or that much space all around (which is clearly 
more than my existing windows)? 


 

From: svpegasus38 via CnC-List 
Sent: Wednesday, December 13, 2017 11:25 PM
To: cnc-list@cnc-list.com 
Cc: svpegasus38 
Subject: Re: Stus-List Window replacement
 

When I did the windows on both of my boats I tried for 3/16 to 1/4 inch gap 
around the plexiglass.  It will expand quite a bit when warmed by the sun. 
I also tried to get everything sealed before the sun hit the plexiglass because 
of the expansion. 
On my LF38 companion way I installed 1/2 thick plexiglass doors. At 
night  there was an 1/8 in gap. The doors would over lap by roughly 1/8+ 
when the sun hit them. 
 
 
 

Sent from my T-Mobile 4G LTE 
Device
Doug Mountjoy 
POYC 
Rebecca Leah  
Lf39
 
 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to