Note:  I used VHB 4991 (0.090"), not 4941.
Gary

~~~~~~~_/)~~~~~~


On Thu, Dec 14, 2017 at 1:51 PM, Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:

> This might be why 3M recommends the 5952:
>
>
>    - Creates a permanent seal against water, moisture and more by
>    offering better gap filling capabilities
>
> That's in the 5952 description on the 3M site.  It does not appear in the
> 4941 description.  Could be the 5952 is more closed cell foam than the 4941.
>
> Dennis C.
>
> On Thu, Dec 14, 2017 at 12:41 PM, Matthew L. Wolford via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Incidentally, I noted in a previous e-mail that a 3M rep I talked to (by
>> calling in) recommended 5952 over 4941.  I just inquired again – this time
>> by e-mail.  3M responded that that it recommends the 59XX series for this
>> application.  For what it’s worth.
>>
>>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to