I have a 1972 C&C 30. It has aluminum frames for the windows. 

Sent from Yahoo Mail for iPhone


On Sunday, December 17, 2017, 2:39 PM, M Bodnar via CnC-List 
<cnc-list@cnc-list.com> wrote:

 

 
 
My CS 30 is the same - no inset for the windows, just flat cabin sides.  
Windows are mounted with the VHB tape which leaves space for the sealant.
 
Mark

  

--------------------- On 2017-12-15 2:55 PM, Gary Russell via CnC-List wrote:
  
 Steve,      My 37+ has, pretty much, a surface installation, but with the 
0.090" VHB tap and a 3/16" bevel there is plenty of room for the sealant.  My 
windows are now 2 years old and no signs of leaking or problems of any kind.  
They also really look attractive!  See pictures of the project here. 
  Gary  
  ~~~~~~~_/)~~~~~~
 
   
 On Fri, Dec 15, 2017 at 1:35 PM, Steve Thomas via CnC-List 
<cnc-list@cnc-list.com> wrote:
 
My C&C27 has windows that are glued and screwed directly on the surface of the 
cabin. There is no cavity, and no visible sealant, and yes they leak. I suspect 
that they were glued down with Plexus or something similar, but I wish that 
whoever did it had left out the screws. Anyway,
 
 Has anyone attempted this sort of on-the-surface installation using VHB tape? 
Seems there would be very little room for sealant. Maybe have to use an exposed 
fillet?
 
 Steve Thomas
 C&C27 MKIII
 
 ______________________________ _________________
 
 Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/ stumurray
 
 
  
  
  
 _______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

 
 
 _______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to