bravo, nice idea! On Thu, May 25, 2017 at 3:05 PM, Dennis C. via CnC-List < cnc-list@cnc-list.com> wrote:
> Had a situation where I wanted to connect two wires twisted and soldered > together with two smaller individual wires. The individual wires could use > a 14-16 connector but the twisted wires needed a 10-12 connector. > > Aha! I grabbed two 14-16 #10 ring connectors and a 10-12 #10 ring > connector and riveted them together with a 3/16 inch 1/4 inch grip aluminum > rivet. Everything got smeared with TefGel since the rivet wasn't tinned > marine grade. Voila, a 3 way connector with two 14-16 connectors and one > 10-12 connector. > > https://drive.google.com/open?id=0B_sb5TfIENvseWVpb0h0WUVvVnc > > Yeah, I could have used a couple of 10-12 butt connectors and twisted > wires together and folded wires over but that's not how we roll on > Touche'. Could have also used a piggy back quick disconnect. > > Dennis C. > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
