Dennis,
You really need to get out more!

sam :-)
From: Dennis C. via CnC-List
Sent: Thursday, May 25, 2017 4:05 PM
To: CnClist
Reply To: cnc-list@cnc-list.com
Cc: Dennis C.
Subject: Stus-List Unique 3 way wire connector

Had a situation where I wanted to connect two wires twisted and soldered together with two smaller individual wires.  The individual wires could use a 14-16 connector but the twisted wires needed a 10-12 connector.

 Aha!  I grabbed two 14-16 #10 ring connectors and a 10-12 #10 ring connector and riveted them together with a 3/16 inch 1/4 inch grip aluminum rivet.  Everything got smeared with TefGel since the rivet wasn't tinned marine grade.  Voila, a 3 way connector with two 14-16 connectors and one 10-12 connector.


Yeah, I could have used a couple of 10-12 butt connectors and twisted wires together and folded wires over but that's not how we roll on Touche'.  Could have also used a piggy back quick disconnect.

Dennis C.

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to