Had a situation where I wanted to connect two wires twisted and soldered
together with two smaller individual wires.  The individual wires could use
a 14-16 connector but the twisted wires needed a 10-12 connector.

 Aha!  I grabbed two 14-16 #10 ring connectors and a 10-12 #10 ring
connector and riveted them together with a 3/16 inch 1/4 inch grip aluminum
rivet.  Everything got smeared with TefGel since the rivet wasn't tinned
marine grade.  Voila, a 3 way connector with two 14-16 connectors and one
10-12 connector.

https://drive.google.com/open?id=0B_sb5TfIENvseWVpb0h0WUVvVnc

Yeah, I could have used a couple of 10-12 butt connectors and twisted wires
together and folded wires over but that's not how we roll on Touche'.
Could have also used a piggy back quick disconnect.

Dennis C.
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to