The USCG minutia is contained in 33CFR84. You will find it in Annex I of the COLREGS, which you are required to have on your boat if you have a Captain's License. And which you probably have on you boat in any event.
33CFR88.05 says: The operator of each self-propelled vessel 12 meters (39.4') or more in length shall carry on board and maintain for ready reference a copy of the Inland Navigation Rules. As has been pointed out before, a navigation light is certified by the light manufacturer to comply with the USCG requirements. IF YOU MANUFACTURE A BOAT FOR SALE IN THE USA YOU MAY ONLY USE A CERTIFIED LIGHT ASSEMBLY. If you are a boat owner, or building a boat for your own use, you can use any lighting device or bulb you chose, provided that the lights meet the requirements of COLREGS RULE 22 (visibility) and RULE 23 (light patterns). Raise your hand if you have one of the Davis LED anchor lights that plug into a cigarette lighter, or a battery operated Perko anchor light you keep as a backup. Both meet COLREGS 22 for boats less than 39 feet, but neither are certified by the manufacturer. At least mine aren't marked as certified. I can find no direct reference to the nav lights required in 46CFR Subchapter C covering uninspected passenger vessels of less than 100 tons carrying 6 or fewer passengers, other than the requirement to comply with COLREGS 22 & 23. For small inspected passenger vessels up to 100 tons carrying 100 or fewer passengers, 46CFR Subchapter T paragraph 183.420 says: All vessels must have navigation lights that are in compliance with the applicable sections of the International and Inland Navigation rules, except that a vessel of more than 198 meters (65') in length must also have navigation lights that meet UL 1104 "Standards for Marine Navigation Lights" or other standard specified by the Commandant. Bottom line is that as a Captain you must comply with the light visibility and patterns specified in the COLREGS, and you must have a copy of the current COLREGS aboard. If you don't have a captain's license and you boat is less than 12 meters you must comply with the COLREGS. And if the boat is over 12 meters you need to comply and carry a copy of the COLREGS. I could not find anything in the 2000+ pages of Federal Regulation I got while obtaining my Masters License that indicates you need to use a certified light, use the same type of bulb, or buy the same bulb used in building your boat - but you must comply with COLREGS 22&23. Rick Brass Sent from my iPad > On Oct 30, 2014, at 21:38, Russ & Melody via CnC-List <cnc-list@cnc-list.com> > wrote: > > > I'm guessing from previous discussions that you only need to worry about this > USCG reg minutiae is if you have a Captain's license. Right? > > :) > > Cheers, Russ > Sweet 35 mk-1 > > If you dream, dream big. > If you can think of a better world you will have a better world. > If pigs could fly imagine how good their wings would taste... > > > > At 06:53 AM 30/10/2014, you wrote: > >> And then there was the discussion of whether putting LED bulbs in old >> fixtures would be compliant with USCG regs. Many said no as the whole >> unit, both bulb and fixture, has to be certified. And that was why for a >> long period there were so few USCG approved LED running lights; the approval >> process was long and involved and many companies did not want to expend the >> $ or effort… >> >> So, if an incident were to occur and it was discovered that the whole >> fixture was not in compliance [and lights were relevant to the incident] >> might liability fall differently and insurance companies not be forthcoming >> with any coverage? >> >> Any current thoughts? >> >> From: CnC-List [ mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill >> Coleman via CnC-List >> Sent: Thursday, October 30, 2014 9:24 AM >> To: cnc-list@cnc-list.com >> Subject: Stus-List Running Lights >> >> Now this really confuses me, when I first went LED on my forward running >> lights, I replaced them with red and green, and then someone, I think at the >> boat show, or maybe in one of the boat magazines, said you had to have white >> coming through a colored lens, so I changed back to white. >> Now my port running light is broken, and I am in the market, and now I am >> really confused! >> >> Regards, >> >> Bill Coleman >> C&C 39 > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
