Joel,
Here's one with dimensions, etc. You could print it, take it to a machine shop
and get an estimate. Only problem, it's in German.
http://www.randpsystems.co.uk/seawolf/engines.htm
Scroll to the bottom of the page. There's a link there. It didn't copy well.
Dennis C.
>________________________________
> From: Joel Aronson <joel.aron...@gmail.com>
>To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
>Sent: Friday, December 13, 2013 10:13 AM
>Subject: Re: Stus-List Cutlass bearing removal tool
>
>
>
>Here is a link to a homemade tool:
>
>http://www.trawlerforum.com/forums/s6/cutlass-bearing-replacement-shaft-place-5714.html
>
>Joel
>
>
>On Friday, December 13, 2013, Joel Aronson wrote:
>
>Josh,
>>
>>
>>I'm trying to avoid the step of "removing the shaft". Internet wisdom also
>>says you can make your own tool, but I don't know if I can find something
>>sized properly to push out the old one. If the yard has the tool I may pay
>>them to do it.
>>
>>
>>Joel
>>
>>On Friday, December 13, 2013, Josh Muckley wrote:
>>
>>Internet wisdom says that if you don't mind removing the shaft, a hack saw
>>threaded up the cutlass will remove it and a length of all thread and some
>>washers will install it. Let us know what works.
>>>Good luck,
>>>Josh
>>>
>>>On Dec 13, 2013 9:54 AM, "Joel Aronson" <joel.aron...@gmail.com> wrote:
>>>
>>>For 50 I would buy it. The one I saw was 400! Can you point me in the right
>>>direction?
>>>>
>>>>On Friday, December 13, 2013, Josh Muckley wrote:
>>>>
>>>>Nope, but if you end up buying one... I remember seeing one where you
>>>>didn't have to remove the shaft. I think it ran about $50.
>>>>>Josh
>>>>>On Dec 13, 2013 8:28 AM, "Joel Aronson" <joel.aron...@gmail.com> wrote:
>>>>>
>>>>>All,
>>>>>>
>>>>>>
>>>>>>Does anyone in the Annapolis area have a cutlass bearing removal tool for
>>>>>>a 1 inch shaft that I could borrow?
>>>>>>
>>>>>>
>>>>>>Thanks!
>>>>>>Joel
>>>>>>35/3
>>>>>>The Office
>>>>>>Annapolis
>>>>>>
>>>>>>--
>>>>>>Joel
>>>>>>301 541 8551
>>>>>>
>>>>>>_______________________________________________
>>>>>>This List is provided by the C&C Photo Album
>>>>>>http://www.cncphotoalbum.com
>>>>>>CnC-List@cnc-list.com
>>>>>>
>>>>>>
>>>>
>>>>--
>>>>Joel
>>>>301 541 8551
>>>>
>>>>_______________________________________________
>>>>This List is provided by the C&C Photo Album
>>>>http://www.cncphotoalbum.com
>>>>CnC-List@cnc-list.com
>>>>
>>>>
>>
>>--
>>Joel
>>301 541 8551
>>
>
>--
>Joel
>301 541 8551
>
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
