It will be better if he made it deeper
Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley Sent: February 14, 2013 2:20 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List 1989 C&C 37+ rudder rebuild Graham, I haven't sighted the rudder specifically yet nor do I have even mildly calibrated tools with which to make measurements, so the answer to your question is "maybe". There was some deformation from years of freeze/thaw on the remaining original skin. Steve did sand and fair those deformations as best he could. He also made sure to create the proper shape out of the foam prior to laminating it. The fiberglass matte was also wrapped around the edges about 4 inches the whole way around. So truely the rudder would probably not fit in the original mold (on either side). However, given Steve's expertise, I believe that whatever inconsistencies may exsist will be negligible and irrelevant to the performance of the boat. Not only that but the rudder will certainly be 100x better than the way it was. I can only hope at this point. :) Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD > ------------------------------ > > Message: 3 > Date: Thu, 14 Feb 2013 06:58:16 -0400 > From: Graham Collins <cnclistforw...@hotmail.com> > To: cnc-list@cnc-list.com > Subject: Re: Stus-List 1989 C&C 37+ rudder rebuild > Message-ID: <blu0-smtp306fafa92f4f726f3f550f3d8...@phx.gbl> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Cool, thanks Josh! > > Question, wouldn't this make it slightly non-symmetrical? Or did he > add fairing compound to the opposite side to bulk it out the same amount? > > Graham Collins > Secret Plans > C&C 35-III #11 > > On 2013-02-14 5:44 AM, Josh Muckley wrote: > > > > Sorry folks, I forgot to include the link to the pictures. Rookie mistake. > > > > https://docs.google.com/folder/d/0B8pEh5lnvP1yVUdWUDNxVGFUcDA/edit > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C&C 37+ > > Maryland > > > > On Feb 13, 2013 9:54 PM, "Josh Muckley" <muckl...@gmail.com > > <mailto:muckl...@gmail.com>> wrote: > > > > Hey everyone just wanted to share some pictures of the rudder > > rebuild on my 1989 C&C 37+. Steve Uhthoff at Annapolis Gelcoat > > and Fiberglass did a fantastic job and gave fantastic support. > > > > As a bit of a background on the boat and the rudder. I bought it > > May 2012. At the time of the survey it was noted that the rudder > > had high moisture though no movement over the shaft was noted. > > The exact extent of condition could not be determined. I decided > > that the rudder was absolutely going to be the firs _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2238 / Virus Database: 2639/5603 - Release Date: 02/14/13
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com