RE: Emergency rudder
Friends who have used plywood attached to the spin pole say it was virtually impossible to control in anything but flat water. The lever arm of the pole out the back of the boat would overwhelm the control lines to the winches. The pole out the back of the boat had to be quite long to reach the water. That left a short part of the pole to secure to the winches. The boat would not go upwind and the following sea downwind pushed the pole around. The bigger the piece of plywood the harder it was to control. Fred Hazzard S/V Fury C&C 44 Portland, Or From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Tuesday, November 20, 2012 6:47 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List ISAF regs After some research last night, it looks like there are two types of emergency rudders. One is a removable transom mount with a tiller. The other method is to attach a large piece of plywood or an old rudder to the spinnaker pole with U bolts and lash the pole to the backstay. The "rudder" is controlled with lines running from its trailing edge to snatch blocks and then to the winches. Old J24 rudders seems to be somewhat common on EBay. On Mon, Nov 19, 2012 at 8:10 PM, Joel Aronson <joel.aron...@gmail.com> wrote: We could have a one-design class if we get a few more 35/3s! I'll work on the rudder issue. I've emailed my rigger already. Joel Sent from my iPad On Nov 19, 2012, at 8:07 PM, Jake Brodersen <captain_j...@cox.net> wrote: Joel, I've always had my eye on an Annapolis-Bermuda race. I am game if you need crew. Jake Jake Brodersen C&C 35 Mk-III "Midnight Mistress Hampton VA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Monday, November 19, 2012 4:59 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List ISAF regs If I could solve the rudder problem and get you, Dave and others to join the crew I would! I need to find an old rudder off about a 30 footer and then design a support. You in? On Mon, Nov 19, 2012 at 4:51 PM, Tim Goodyear <timg...@gmail.com> wrote: Can we assume you've entered the race then Joel? Tim Mojito C&C 35-3 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
