I think Dennis needs to tell us the rest of the story… Knowing Dennis, it’s got to be good!
Jake Jake Brodersen C&C 35 Mk-III "Midnight Mistress Hampton VA From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. Sent: Friday, September 07, 2012 6:14 PM To: Cn Clist Subject: Stus-List Mast rake adjustment OK, check my math and thinking on this one. I want to increase the rake in Touche's mast. I made some changes in the rig a few months ago which brought the masthead forward so the plumb from the masthead is only about 6 inches aft of the gooseneck. It used to be 9-10 inches to get 1 degree of rake. The foretriangle is close to a right triangle. I=44' and J = 14.5'. If I add the 6 inches to J (for the plumb drop from the masthead), I get a right triangle with sides of 44.0 and 15.0 and a hypotenuse of 46.487 (the forestay). So, if I want to move the masthead aft another 6 inches, I end up with a triangle of 44.0, 15.5 and 46.650. The difference in the lengths of the hypotenuses (hypoteni?) is 0.163 or about 2 inches. By my thinking, I need a new forestay about 2 inches longer than the existing one. There's more to the story than this, like it's really 5 inches each for the plumb and rake increase and I'm removing an extra toggle from the top but the math and method should be right. Am I right? Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
