LMI could be purposefully misconfigured.

--
Marko Milivojevic - CCIE #18427 (SP R&S)
Senior CCIE Instructor - IPexpert

On Wed, Oct 24, 2012 at 5:43 PM, Bob McCouch <[email protected]> wrote:
> Deleted PVC status would suggest the router is not hearing of this PVC
> in the LMI responses from the FR Switch. Is this in Proctor Labs, or
> another environment? If your own lab or something, have you verified
> that the PVC mapping does exist in the FR switch?
>
> Check "sh frame lmi" and make sure you're really getting LMI responses, too.
>
> Bob
> --
> Sent from my iPhone, please excuse any typos.
>
> On Oct 24, 2012, at 8:32 PM, Lukasz <[email protected]> wrote:
>
>> Hi All,
>>
>>
>> Troubleshooting part of vol3 lab3. I have checked configurations for R5 and 
>> R6 and it looks good to me but two routers cannot communicate. It looks that 
>> the layer 2 does not work as expected.
>>
>>
>>
>> R6#
>> interface Serial0/1/0
>> ip address 223.5.6.6 255.255.255.224
>> ip pim bsr-border
>> ip pim sparse-mode
>> encapsulation frame-relay
>> ip ospf network point-to-point
>> ip ospf 1 area 569
>> frame-relay map ip 223.5.6.5 605 broadcast
>> frame-relay map ip 223.5.6.6 605
>> no frame-relay inverse-arp
>> frame-relay lmi-type cisco
>> end
>>
>>
>>
>> R6(config-if)#do show frame map
>> Serial0/1/0 (up): ip 223.5.6.6 dlci 605(0x25D,0x94D0), static,
>>              broadcast,
>>              CISCO, status deleted
>> Serial0/1/0 (up): ip 223.5.6.5 dlci 605(0x25D,0x94D0), static,
>>              CISCO, status deleted
>>
>> R5
>>
>> interface Serial0/1/0
>> no ip address
>> encapsulation frame-relay
>> no frame-relay inverse-arp
>> frame-relay lmi-type cisco
>> interface Serial0/1/0.56 point-to-point
>> ip address 223.5.6.5 255.255.255.224
>> ip pim bsr-border
>> ip ospf network point-to-point
>> ip ospf 1 area 569
>> snmp trap link-status
>> frame-relay interface-dlci 506
>>
>> R5#show frame map
>> Serial0/1/0.56 (down): point-to-point dlci, dlci 506(0x1FA,0x7CA0), broadcast
>>          status deleted
>> R5#
>> R5#
>>
>> Is there anything wrong with that config?
>>
>>
>> Regards
>> Lukasz
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>>
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to