Deleted PVC status would suggest the router is not hearing of this PVC in the LMI responses from the FR Switch. Is this in Proctor Labs, or another environment? If your own lab or something, have you verified that the PVC mapping does exist in the FR switch?
Check "sh frame lmi" and make sure you're really getting LMI responses, too. Bob -- Sent from my iPhone, please excuse any typos. On Oct 24, 2012, at 8:32 PM, Lukasz <[email protected]> wrote: > Hi All, > > > Troubleshooting part of vol3 lab3. I have checked configurations for R5 and > R6 and it looks good to me but two routers cannot communicate. It looks that > the layer 2 does not work as expected. > > > > R6# > interface Serial0/1/0 > ip address 223.5.6.6 255.255.255.224 > ip pim bsr-border > ip pim sparse-mode > encapsulation frame-relay > ip ospf network point-to-point > ip ospf 1 area 569 > frame-relay map ip 223.5.6.5 605 broadcast > frame-relay map ip 223.5.6.6 605 > no frame-relay inverse-arp > frame-relay lmi-type cisco > end > > > > R6(config-if)#do show frame map > Serial0/1/0 (up): ip 223.5.6.6 dlci 605(0x25D,0x94D0), static, > broadcast, > CISCO, status deleted > Serial0/1/0 (up): ip 223.5.6.5 dlci 605(0x25D,0x94D0), static, > CISCO, status deleted > > R5 > > interface Serial0/1/0 > no ip address > encapsulation frame-relay > no frame-relay inverse-arp > frame-relay lmi-type cisco > interface Serial0/1/0.56 point-to-point > ip address 223.5.6.5 255.255.255.224 > ip pim bsr-border > ip ospf network point-to-point > ip ospf 1 area 569 > snmp trap link-status > frame-relay interface-dlci 506 > > R5#show frame map > Serial0/1/0.56 (down): point-to-point dlci, dlci 506(0x1FA,0x7CA0), broadcast > status deleted > R5# > R5# > > Is there anything wrong with that config? > > > Regards > Lukasz > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
