[quoted lines by Dominique Asselineau on 2015/11/12 at 15:33 +0100] >> The default configuration is too try all drivers that know >> about USB. That *should* include the hw driver. > >this does not seem to be the case on BRLTTY 4.4 (Wheezy).
I just checked to be sure. While the default is to look for USB devices, hw isn't in the list of drivers that 4.4 checks for. In other words, you do need to specify the driver but shouldn't need to specify the device. In another message you mentioned having tried the device serial:ttyUSB0. While one would expect that to work, it doesn't in this particular case. When an ACM-type device is used (as is the case for a Brailliant BI), tghe serial device Linux creates is ttyACM0. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
