Dominique Asselineau <assel...@telecom-paristech.fr> writes: > When i connect a Brailliant BI 40 to a PC under Linux/Debian 7.9 (Wheezy) > with BRLTTY 4.4, notihing appears on the braille display and the logs > contain these lines > > | Nov 10 16:11:27 agra kernel: [6310986.335056] usb 1-2: new full-speed USB > device number 67 using xhci_hcd > | Nov 10 16:11:27 agra kernel: [6310986.354084] usb 1-2: New USB device > found, idVendor=1c71, idProduct=c005 > | Nov 10 16:11:27 agra kernel: [6310986.354090] usb 1-2: New USB device > strings: Mfr=1, Product=2, SerialNumber=3 > | Nov 10 16:11:27 agra kernel: [6310986.354094] usb 1-2: Product: BRAILLE > DEVICE > | Nov 10 16:11:27 agra kernel: [6310986.354097] usb 1-2: Manufacturer: > FREESCALE SEMI > | Nov 10 16:11:27 agra kernel: [6310986.354099] usb 1-2: SerialNumber: 003515 > | Nov 10 16:11:27 agra kernel: [6310986.354265] usb 1-2: ep 0x81 - rounding > interval to 64 microframes, ep desc says 80 microframes > | Nov 10 16:11:27 agra kernel: [6310986.354750] cdc_acm 1-2:1.0: This device > cannot do calls on its own. It is not a modem. > | Nov 10 16:11:27 agra kernel: [6310986.354862] cdc_acm 1-2:1.0: ttyACM0: USB > ACM device > | Nov 10 16:12:47 agra kernel: [6311066.177544] usb 1-2: USB disconnect, > device number 67 > > What should I do on the braille display?
Is BRLTTY running? Did you try the latest development version? I am not 100% positive that HumanWare already worked with the version of BRLTTY release with wheezy. Do you have a file /lib/brltty/libbrlttybhw.so? -- CYa, ⡍⠁⠗⠊⠕ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
