Hi, When i connect a Brailliant BI 40 to a PC under Linux/Debian 7.9 (Wheezy) with BRLTTY 4.4, notihing appears on the braille display and the logs contain these lines
| Nov 10 16:11:27 agra kernel: [6310986.335056] usb 1-2: new full-speed USB device number 67 using xhci_hcd | Nov 10 16:11:27 agra kernel: [6310986.354084] usb 1-2: New USB device found, idVendor=1c71, idProduct=c005 | Nov 10 16:11:27 agra kernel: [6310986.354090] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | Nov 10 16:11:27 agra kernel: [6310986.354094] usb 1-2: Product: BRAILLE DEVICE | Nov 10 16:11:27 agra kernel: [6310986.354097] usb 1-2: Manufacturer: FREESCALE SEMI | Nov 10 16:11:27 agra kernel: [6310986.354099] usb 1-2: SerialNumber: 003515 | Nov 10 16:11:27 agra kernel: [6310986.354265] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes | Nov 10 16:11:27 agra kernel: [6310986.354750] cdc_acm 1-2:1.0: This device cannot do calls on its own. It is not a modem. | Nov 10 16:11:27 agra kernel: [6310986.354862] cdc_acm 1-2:1.0: ttyACM0: USB ACM device | Nov 10 16:12:47 agra kernel: [6311066.177544] usb 1-2: USB disconnect, device number 67 What should I do on the braille display? Thanks. dominique -- _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
