Not sure what the behaviour is if you set stub and PTP, but I assume you are
getting stub behaviour here. Remove stub, should work.
Keenan
On Dec 30, 2016, 5:11 PM, at 5:11 PM, "David S." <da...@zeromail.us> wrote:
>Hi Dave,
>
>No, the correct value is pointopoint or ptp, I have tried type ptp and
>broadcast but still same.
>The neighbor won't up.
>I don't know if it's a bug or not but I have tried very basic
>configuration
>from wiki page and still same.
>
>Thank you
>
>
>
>Best regards,
>David S.
>------------------------------------------------
>e. da...@zeromail.us
>w. pnyet.web.id
>p. 087881216110
>
>On Sat, Dec 31, 2016 at 8:06 AM, dave seddon <dave.seddon...@gmail.com>
>wrote:
>
>> Just a guess "pointopoint" -> "pointtopoint"
>>
>> On Dec 30, 2016 5:04 PM, "David S." <da...@zeromail.us> wrote:
>>
>>> Dear All,
>>>
>>> I have trouble to establish ospf on BIRD 1.6.3 using FreeBSD 11
>amd64,
>>> here is my topology and BIRD configuration:
>>>
>>> router-a ------ router-b (directly connected use cat6)
>>>
>>> router-a: 10.22.40.17/30
>>> router-b: 10.22.40.18/30
>>>
>>> bird.conf in router-a
>>>
>>> router id 10.5.16.1;
>>> debug all;
>>> import filter ospf_in_routerb;
>>> export filter ospf_out_routerb;
>>> tick 2;
>>> area 0 {
>>> interface "bge0" {
>>> stub;
>>> cost 5;
>>> hello 10; retransmit 2; wait 10; dead 40;
>>> type pointopoint;
>>> };
>>> networks {
>>> 103.22.40.16/30;
>>> };
>>> interface "*" {
>>> cost 1000;
>>> stub;
>>> };
>>> };
>>> }
>>>
>>> bird.conf in routerb
>>>
>>> router id 10.5.16.2;
>>> debug all;
>>> import filter ospf_in_routera;
>>> export filter ospf_out_routera;
>>> tick 2;
>>> area 0 {
>>> interface "bge0" {
>>> stub;
>>> cost 5;
>>> hello 10; retransmit 2; wait 10; dead 40;
>>> type pointopoint;
>>> };
>>> networks {
>>> 103.22.40.16/30;
>>> };
>>> interface "*" {
>>> cost 1000;
>>> stub;
>>> };
>>> };
>>> }
>>>
>>> I found the following error message from bird.log:
>>>
>>> 2016-12-31 07:52:38 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:52:43 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:52:48 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:52:53 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:52:57 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:03 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:07 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:13 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:18 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:22 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:27 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>> 2016-12-31 07:53:28 <ERR> ospf1: Socket error on bge0: Invalid
>argument
>>>
>>> Show ospf:
>>>
>>> bird> show ospf
>>> ospf1:
>>> RFC1583 compatibility: disabled
>>> Stub router: No
>>> RT scheduler tick: 2
>>> Number of areas: 1
>>> Number of LSAs in DB: 260
>>> Area: 0.0.0.0 (0) [BACKBONE]
>>> Stub: No
>>> NSSA: No
>>> Transit: No
>>> Number of interfaces: 25
>>> Number of neighbors: 0
>>> Number of adjacent neighbors: 0
>>> Area networks:
>>> 10.22.40.16/30 Advertise
>>>
>>> bird> show protocols all ospf1
>>> name proto table state since info
>>> ospf1 OSPF master up 07:53:28 Alone
>>> Router ID: 10.8.60.1
>>> Preference: 150
>>> Input filter: ospf_in_routerb
>>> Output filter: ospf_out_routerb
>>> Routes: 25 imported, 259 exported, 0 preferred
>>> Route change stats: received rejected filtered ignored
>>> accepted
>>> Import updates: 25 0 0 0
>>> 25
>>> Import withdraws: 0 0 --- 0
>>> 0
>>> Export updates: 630587 0 630328 ---
>>> 259
>>> Export withdraws: 22 --- --- ---
>>> 0
>>>
>>> Why ospf neighbor can't established?
>>> I'm new to ospf and really need help.
>>>
>>> Thank you
>>>
>>> Best regards,
>>> David S.
>>> ------------------------------------------------
>>> e. da...@zeromail.us
>>> w. pnyet.web.id
>>>
>>
