Dear All,
I have trouble to establish ospf on BIRD 1.6.3 using FreeBSD 11 amd64, here
is my topology and BIRD configuration:
router-a ------ router-b (directly connected use cat6)
router-a: 10.22.40.17/30
router-b: 10.22.40.18/30
bird.conf in router-a
router id 10.5.16.1;
debug all;
import filter ospf_in_routerb;
export filter ospf_out_routerb;
tick 2;
area 0 {
interface "bge0" {
stub;
cost 5;
hello 10; retransmit 2; wait 10; dead 40;
type pointopoint;
};
networks {
103.22.40.16/30;
};
interface "*" {
cost 1000;
stub;
};
};
}
bird.conf in routerb
router id 10.5.16.2;
debug all;
import filter ospf_in_routera;
export filter ospf_out_routera;
tick 2;
area 0 {
interface "bge0" {
stub;
cost 5;
hello 10; retransmit 2; wait 10; dead 40;
type pointopoint;
};
networks {
103.22.40.16/30;
};
interface "*" {
cost 1000;
stub;
};
};
}
I found the following error message from bird.log:
2016-12-31 07:52:38 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:52:43 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:52:48 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:52:53 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:52:57 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:03 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:07 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:13 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:18 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:22 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:27 <ERR> ospf1: Socket error on bge0: Invalid argument
2016-12-31 07:53:28 <ERR> ospf1: Socket error on bge0: Invalid argument
Show ospf:
bird> show ospf
ospf1:
RFC1583 compatibility: disabled
Stub router: No
RT scheduler tick: 2
Number of areas: 1
Number of LSAs in DB: 260
Area: 0.0.0.0 (0) [BACKBONE]
Stub: No
NSSA: No
Transit: No
Number of interfaces: 25
Number of neighbors: 0
Number of adjacent neighbors: 0
Area networks:
10.22.40.16/30 Advertise
bird> show protocols all ospf1
name proto table state since info
ospf1 OSPF master up 07:53:28 Alone
Router ID: 10.8.60.1
Preference: 150
Input filter: ospf_in_routerb
Output filter: ospf_out_routerb
Routes: 25 imported, 259 exported, 0 preferred
Route change stats: received rejected filtered ignored
accepted
Import updates: 25 0 0 0
25
Import withdraws: 0 0 --- 0
0
Export updates: 630587 0 630328 ---
259
Export withdraws: 22 --- --- ---
0
Why ospf neighbor can't established?
I'm new to ospf and really need help.
Thank you
Best regards,
David S.
------------------------------------------------
e. da...@zeromail.us
w. pnyet.web.id
