Hi David, Can you please provide us with the output of 'ifconfig bge0' from both machines?
It would also be helpful to get ping router-a from router-b and vise versa. Does this work? Thank you in advance. Best, Plamen On Tue, Jan 3, 2017 at 9:43 PM, David S. <da...@zeromail.us> wrote: > Hi, > > After installing a 1 server with FreeBSD11 and configure BIRD with minimum > configuration I saw that error "invalid argument" for bge0 is still appear > but not for igb*. > > This takes more than 4 days, still confusing. > > Does netmap cased this problem? Netmap is enabled by default on FreeBSD11 > (CMIIW). > > Thank you > > > > > > Best regards, > David S. > ------------------------------------------------ > e. da...@zeromail.us > w. pnyet.web.id > p. 087881216110 > > On Tue, Jan 3, 2017 at 4:53 PM, David S. <da...@zeromail.us> wrote: > >> Hi Ondrej, >> >> I have no firewall enable and it's not work on all card. I have 4 port >> 1gbe broadcom and 4 port 1gbe intel I350 chipset based. >> The clue I only have is ospf not sending hello packet between routera to >> routerb vice versa, both of server use HP DL360 Gen9 FreeBSD11. >> Both router has multiple bgp session and receive full route from the >> internet. >> >> It's weird, when routera able to send and receive ospf hello packets from >> and to routerc vice versa, both of them are FreeBSD11. >> >> I'll try to reinstall the OS and configure ospf first and then one by one >> configure the bgp. >> >> So, it's only happen to me? :d >> >> Thanks anyway. >> >> >> >> >> >> >> >> Best regards, >> David S. >> ------------------------------------------------ >> e. da...@zeromail.us >> w. pnyet.web.id >> p. 087881216110 >> >> On Mon, Jan 2, 2017 at 9:04 PM, Ondrej Zajicek <santi...@crfreenet.org> >> wrote: >> >>> On Mon, Jan 02, 2017 at 01:33:57AM +0700, David S. wrote: >>> > Hi, >>> > >>> > I tried to setup new environment using FreeBSD11 amd64 on vmware and >>> > everything work without a problem, I didn't see any error or interface >>> > issue like on routera and routerb. Let's say that new router we called >>> it >>> > routerc and routerd. >>> > I try to create ospf session between routera to routerc, routerb to >>> routerd >>> > and the neighbor is appear, everything is normal. >>> > I don't know why but the ospf hello packets are not sent by routera to >>> > routerb or vice versa. >>> >>> It seems like some specific problem in your setup. Perhaps firewall or >>> insufficient privileges? Does it work with different network card? >>> >>> -- >>> Elen sila lumenn' omentielvo >>> >>> Ondrej 'Santiago' Zajicek (email: santi...@crfreenet.org) >>> OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) >>> "To err is human -- to blame it on a computer is even more so." >>> >> >> >
