Just a guess "pointopoint" -> "pointtopoint"
On Dec 30, 2016 5:04 PM, "David S." <da...@zeromail.us> wrote:
> Dear All,
>
> I have trouble to establish ospf on BIRD 1.6.3 using FreeBSD 11 amd64,
> here is my topology and BIRD configuration:
>
> router-a ------ router-b (directly connected use cat6)
>
> router-a: 10.22.40.17/30
> router-b: 10.22.40.18/30
>
> bird.conf in router-a
>
> router id 10.5.16.1;
> debug all;
> import filter ospf_in_routerb;
> export filter ospf_out_routerb;
> tick 2;
> area 0 {
> interface "bge0" {
> stub;
> cost 5;
> hello 10; retransmit 2; wait 10; dead 40;
> type pointopoint;
> };
> networks {
> 103.22.40.16/30;
> };
> interface "*" {
> cost 1000;
> stub;
> };
> };
> }
>
> bird.conf in routerb
>
> router id 10.5.16.2;
> debug all;
> import filter ospf_in_routera;
> export filter ospf_out_routera;
> tick 2;
> area 0 {
> interface "bge0" {
> stub;
> cost 5;
> hello 10; retransmit 2; wait 10; dead 40;
> type pointopoint;
> };
> networks {
> 103.22.40.16/30;
> };
> interface "*" {
> cost 1000;
> stub;
> };
> };
> }
>
> I found the following error message from bird.log:
>
> 2016-12-31 07:52:38 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:52:43 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:52:48 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:52:53 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:52:57 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:03 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:07 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:13 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:18 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:22 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:27 <ERR> ospf1: Socket error on bge0: Invalid argument
> 2016-12-31 07:53:28 <ERR> ospf1: Socket error on bge0: Invalid argument
>
> Show ospf:
>
> bird> show ospf
> ospf1:
> RFC1583 compatibility: disabled
> Stub router: No
> RT scheduler tick: 2
> Number of areas: 1
> Number of LSAs in DB: 260
> Area: 0.0.0.0 (0) [BACKBONE]
> Stub: No
> NSSA: No
> Transit: No
> Number of interfaces: 25
> Number of neighbors: 0
> Number of adjacent neighbors: 0
> Area networks:
> 10.22.40.16/30 Advertise
>
> bird> show protocols all ospf1
> name proto table state since info
> ospf1 OSPF master up 07:53:28 Alone
> Router ID: 10.8.60.1
> Preference: 150
> Input filter: ospf_in_routerb
> Output filter: ospf_out_routerb
> Routes: 25 imported, 259 exported, 0 preferred
> Route change stats: received rejected filtered ignored
> accepted
> Import updates: 25 0 0 0
> 25
> Import withdraws: 0 0 --- 0
> 0
> Export updates: 630587 0 630328 ---
> 259
> Export withdraws: 22 --- --- ---
> 0
>
> Why ospf neighbor can't established?
> I'm new to ospf and really need help.
>
> Thank you
>
> Best regards,
> David S.
> ------------------------------------------------
> e. da...@zeromail.us
> w. pnyet.web.id
>
