Hi Dave,
No, the correct value is pointopoint or ptp, I have tried type ptp and
broadcast but still same.
The neighbor won't up.
I don't know if it's a bug or not but I have tried very basic configuration
from wiki page and still same.
Thank you
Best regards,
David S.
------------------------------------------------
e. da...@zeromail.us
w. pnyet.web.id
p. 087881216110
On Sat, Dec 31, 2016 at 8:06 AM, dave seddon <dave.seddon...@gmail.com>
wrote:
> Just a guess "pointopoint" -> "pointtopoint"
>
> On Dec 30, 2016 5:04 PM, "David S." <da...@zeromail.us> wrote:
>
>> Dear All,
>>
>> I have trouble to establish ospf on BIRD 1.6.3 using FreeBSD 11 amd64,
>> here is my topology and BIRD configuration:
>>
>> router-a ------ router-b (directly connected use cat6)
>>
>> router-a: 10.22.40.17/30
>> router-b: 10.22.40.18/30
>>
>> bird.conf in router-a
>>
>> router id 10.5.16.1;
>> debug all;
>> import filter ospf_in_routerb;
>> export filter ospf_out_routerb;
>> tick 2;
>> area 0 {
>> interface "bge0" {
>> stub;
>> cost 5;
>> hello 10; retransmit 2; wait 10; dead 40;
>> type pointopoint;
>> };
>> networks {
>> 103.22.40.16/30;
>> };
>> interface "*" {
>> cost 1000;
>> stub;
>> };
>> };
>> }
>>
>> bird.conf in routerb
>>
>> router id 10.5.16.2;
>> debug all;
>> import filter ospf_in_routera;
>> export filter ospf_out_routera;
>> tick 2;
>> area 0 {
>> interface "bge0" {
>> stub;
>> cost 5;
>> hello 10; retransmit 2; wait 10; dead 40;
>> type pointopoint;
>> };
>> networks {
>> 103.22.40.16/30;
>> };
>> interface "*" {
>> cost 1000;
>> stub;
>> };
>> };
>> }
>>
>> I found the following error message from bird.log:
>>
>> 2016-12-31 07:52:38 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:52:43 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:52:48 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:52:53 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:52:57 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:03 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:07 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:13 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:18 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:22 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:27 <ERR> ospf1: Socket error on bge0: Invalid argument
>> 2016-12-31 07:53:28 <ERR> ospf1: Socket error on bge0: Invalid argument
>>
>> Show ospf:
>>
>> bird> show ospf
>> ospf1:
>> RFC1583 compatibility: disabled
>> Stub router: No
>> RT scheduler tick: 2
>> Number of areas: 1
>> Number of LSAs in DB: 260
>> Area: 0.0.0.0 (0) [BACKBONE]
>> Stub: No
>> NSSA: No
>> Transit: No
>> Number of interfaces: 25
>> Number of neighbors: 0
>> Number of adjacent neighbors: 0
>> Area networks:
>> 10.22.40.16/30 Advertise
>>
>> bird> show protocols all ospf1
>> name proto table state since info
>> ospf1 OSPF master up 07:53:28 Alone
>> Router ID: 10.8.60.1
>> Preference: 150
>> Input filter: ospf_in_routerb
>> Output filter: ospf_out_routerb
>> Routes: 25 imported, 259 exported, 0 preferred
>> Route change stats: received rejected filtered ignored
>> accepted
>> Import updates: 25 0 0 0
>> 25
>> Import withdraws: 0 0 --- 0
>> 0
>> Export updates: 630587 0 630328 ---
>> 259
>> Export withdraws: 22 --- --- ---
>> 0
>>
>> Why ospf neighbor can't established?
>> I'm new to ospf and really need help.
>>
>> Thank you
>>
>> Best regards,
>> David S.
>> ------------------------------------------------
>> e. da...@zeromail.us
>> w. pnyet.web.id
>>
>
