Hello,
As an update, ~current of April 8, 2017, still doesn't recognize sd card of
the referred BananaPro. I should probably mention that sd card is 16GB
size, unlike up to 4GB cards for the mother device (possibly both BananaPi
and Cubieboard). Install script and dmesg follow.
======
Script started on Sun Apr 9 12:50:19 2017
$ cu -l cuaU0 -s 115200
Connected to /dev/cuaU0 (speed 115200)
U-Boot SPL 2016.07 (Jul 26 2016 - 02:49:44)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1
U-Boot 2016.07 (Jul 26 2016 - 02:49:44 -0600) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Model: LeMaker Banana Pro
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
Setting up a 720x576i composite-pal console (overscan 32x20)
In: serial
Out: vga
Err: vga
SCSI: SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@01c50000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootarm.efi
reading efi/boot/bootarm.efi
64684 bytes read in 44 ms (1.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
## Starting EFI application at 0x42000000 ...
Scanning disks on scsi...
Scanning disks on usb...
Scanning disks on mmc...
MMC Device 1 not found
MMC Device 2 not found
MMC Device 3 not found
Found 6 disks
>> OpenBSD/armv7 BOOTARM 0.5
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2153176+7983908+438864 [80+301584+143437]=0xa851c0
OpenBSD/armv7 booting ...
arg0 0xc0d851c0 arg1 0x0 arg2 0x48000000
Allocating page tables
freestart = 0x40d86000, free_pages = 258276 (0x0003f0e4)
IRQ stack: p0x40db4000 v0xc0db4000
ABT stack: p0x40db5000 v0xc0db5000
UND stack: p0x40db6000 v0xc0db6000
SVC stack: p0x40db7000 v0xc0db7000
Creating L1 page table at 0x40d88000
Mapping kernel
Constructing L2 page tables
undefined page pmap board type: 0
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.1-current (RAMDISK) #84: Sat Apr 8 17:04:11 MDT 2017
dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
real mem = 1072078848 (1022MB)
avail mem = 1037033472 (988MB)
mainbus0 at root: LeMaker Banana Pro
cpu0 at mainbus0: ARM Cortex A7 rev 4 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache
cortex0 at mainbus0
psci0 at mainbus0
agtimer0 at mainbus0: tick rate 24000 KHz
sxiccmu0 at mainbus0
simplebus0 at mainbus0: "soc"
sxipio0 at simplebus0: 175 pins
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Allwinner EHCI root hub" rev
2.00/1.00 addr 1
sxiahci0 at simplebus0: AHCI 1.1
scsibus0 at sxiahci0: 32 targets
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Allwinner EHCI root hub" rev
2.00/1.00 addr 1
sxidog0 at simplebus0
sxirtc0 at simplebus0
com0 at simplebus0: ns16550, no working fifo
com0: console
com1 at simplebus0: ns16550, no working fifo
com2 at simplebus0: ns16550, no working fifo
dwge0 at simplebus0
dwge0: Ethernet address: 02:17:04:40:c0:cc
rgephy0 at dwge0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
ampintc0 at simplebus0 nirq 160, ncpu 2
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio0: 32 pins
sximmc0: timeout updating clock
(manufacturer 0x2d0, product 0xa962)at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa962)at sdmmc1 function 2 not configured
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sdmmc0: can't enable card
sximmc0: timeout updating clock
boot device: lookup 'sd0a:/bsd' failed.
root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/armv7 6.1 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
# date
Sat Apr 8 22:51:29 GMT 2017
# install
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') bananapro
Available network interfaces are: dwge0.
Which network interface do you wish to configure? (or 'done') [dwge0]
IPv4 address for dwge0? (or 'dhcp' or 'none') [dhcp]
DHCPDISCOVER on dwge0 - interval 1
DHCPOFFER from 192.168.4.1 (45:c9:e3:9b:a3:54)
DHCPREQUEST on dwge0 to 255.255.255.255
DHCPACK from 192.168.4.1 (45:c9:e3:9b:a3:54)
bound to 192.168.4.10 -- renewal in 43199 seconds.
IPv6 address for dwge0? (or 'rtsol' or 'none') [none]
Available network interfaces are: dwge0.
Which network interface do you wish to configure? (or 'done') [done]
Using DNS domainname home.lan
Using DNS nameservers at 192.168.4.1 192.168.5.1
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no]
Since no user was setup, root logins via sshd(8) might be useful.
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
What timezone are you in? ('?' for list) [Europe/Belgrade]
Available disks are: none.
Which disk is the root disk? ('?' for details) ?
Available disks are: none.
Which disk is the root disk? ('?' for details) Available disks are: none.
Which disk is the root disk? ('?' for details) ^C
# dmesg
OpenBSD 6.1-current (RAMDISK) #84: Sat Apr 8 17:04:11 MDT 2017
dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
real mem = 1072078848 (1022MB)
avail mem = 1037033472 (988MB)
mainbus0 at root: LeMaker Banana Pro
cpu0 at mainbus0: ARM Cortex A7 rev 4 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache
cortex0 at mainbus0
psci0 at mainbus0
agtimer0 at mainbus0: tick rate 24000 KHz
sxiccmu0 at mainbus0
simplebus0 at mainbus0: "soc"
sxipio0 at simplebus0: 175 pins
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Allwinner EHCI root hub" rev
2.00/1.00 addr 1
sxiahci0 at simplebus0: AHCI 1.1
scsibus0 at sxiahci0: 32 targets
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Allwinner EHCI root hub" rev
2.00/1.00 addr 1
sxidog0 at simplebus0
sxirtc0 at simplebus0
com0 at simplebus0: ns16550, no working fifo
com0: console
com1 at simplebus0: ns16550, no working fifo
com2 at simplebus0: ns16550, no working fifo
dwge0 at simplebus0
dwge0: Ethernet address: 02:17:04:40:c0:cc
rgephy0 at dwge0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
ampintc0 at simplebus0 nirq 160, ncpu 2
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio0: 32 pins
sximmc0: timeout updating clock
(manufacturer 0x2d0, product 0xa962)at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa962)at sdmmc1 function 2 not configured
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sximmc0: timeout updating clock
sdmmc0: can't enable card
sximmc0: timeout updating clock
boot device: lookup 'sd0a:/bsd' failed.
root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
# halt -p
syncing disks... done
Attempting to power down...
The operating system has halted.
Please press any key to reboot.
[EOT]
$ ^D
Script done on Sun Apr 9 12:54:36 2017
On Sun, Oct 30, 2016 at 10:00 AM, soko.tica <soko.t...@gmail.com> wrote:
> Thank you for your input.
>
> For the record, FreeBSD 11.0-RC3 worked on each of these SD cards.
>
> In the case that it might obe of interest for anyone, i paste here a new
> typescript, starting from downloading and veryfing the images, preparing
> miniroot and starting the installation, which cannot recognize the sd card
> on which it is running, showing no available disks. That is why I tried to
> install from one SD card to another, thinking it is supposed to be so until
> I saw that usb stick recognizes itself as the target disk.
>
>
> =====
> Script started on Sun Oct 30 10:31:43 2016
> $ fdisk sd1
> Disk: sd1 geometry: 1887/255/63 [30318592 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size
> ]
> ------------------------------------------------------------
> -------------------
> *0: 0C 0 32 33 - 0 97 33 [ 2048: 4096 ]
> Win95 FAT32L
> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
> 3: A6 0 97 34 - 2 75 9 [ 6144: 30720 ]
> OpenBSD
> $ doas fdisk -e sd1
> Enter 'help' for information
> fdisk: 1> p m
> Disk: sd1 geometry: 1887/255/63 [30318592 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size
> ]
> ------------------------------------------------------------
> -------------------
> *0: 0C 0 32 33 - 0 97 33 [ 2048: 2M] Win95
> FAT32L
> 1: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> 3: A6 0 97 34 - 2 75 9 [ 6144: 15M]
> OpenBSD
> fdisk: 1> e 0
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size
> ]
> ------------------------------------------------------------
> -------------------
> *0: 0C 0 32 33 - 0 97 33 [ 2048: 4096 ]
> Win95 FAT32L
> Partition id ('0' to disable) [01 - FF]: [C] (? for help) 0
> Partition 0 is disabled.
> fdisk:*1> e 3
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size
> ]
> ------------------------------------------------------------
> -------------------
> 3: A6 0 97 34 - 2 75 9 [ 6144: 30720 ]
> OpenBSD
> Partition id ('0' to disable) [01 - FF]: [A6] (? for help) 0
> Partition 3 is disabled.
> fdisk:*1> p m
> Disk: sd1 geometry: 1887/255/63 [30318592 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size
> ]
> ------------------------------------------------------------
> -------------------
> 0: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> 1: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> 3: 00 0 0 0 - 0 0 0 [ 0: 0M] unused
> fdisk:*1> w
> Writing MBR at offset 0.
> fdisk: 1> q
> $ disklabel sd1
> # /dev/rsd1c:
> type: SCSI
> disk: SCSI disk
> label: Storage Device
> duid: 0000000000000000
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 255
> sectors/cylinder: 16065
> cylinders: 1887
> total sectors: 30318592
> boundstart: 0
> boundend: 30318592
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> c: 30318592 0 unused
> $ pwd
> /home/doasuser
> $ ftp ftp://ftp.obsd.si/pub/OpenBSD/snapshots/armv7/SHA256.sig
> Trying 91.185.196.203...
> Connected to ftp.obsd.si.
> 220 nina.kerberos.si FTP server ready.
> 331 Guest login ok, send your email address as password.
> 230 Guest login ok, access restrictions apply.
> Remote system type is UNIX.
> Using binary mode to transfer files.
> 200 Type set to I.
> 250 CWD command successful.
> Retrieving pub/OpenBSD/snapshots/armv7/SHA256.sig
> local: SHA256.sig remote: SHA256.sig
> 150 Opening BINARY mode data connection for 'SHA256.sig' (1978 bytes).
> 100% |**************************************************| 1978
> 00:00 ETA
> 226 Transfer complete.
> 1978 bytes received in 0.20 seconds (9.45 KB/s)
> 221 Goodbye.
> $ ftp ftp://ftp.obsd.si/pub/OpenBSD/snapshots/armv7/SHA256.sig
> Trying 91.185.196.203...
> Connected to ftp.obsd.si.
> 220 nina.kerberos.si FTP server ready.
> 331 Guest login ok, send your email address as password.
> 230 Guest login ok, access restrictions apply.
> Remote system type is UNIX.
> Using binary mode to transfer files.
> 200 Type set to I.
> 250 CWD command successful.
> Retrieving pub/OpenBSD/snapshots/armv7/SHA256
> local: SHA256 remote: SHA256
> 150 Opening BINARY mode data connection for 'SHA256' (1815 bytes).
> 100% |**************************************************| 1815
> 00:00 ETA
> 226 Transfer complete.
> 1815 bytes received in 0.21 seconds (8.32 KB/s)
> 221 Goodbye.
> $ ftp ftp://ftp.obsd.si/pub/OpenBSD/snapshots/armv7/miniroot-cubie-60.fs
> Trying 91.185.196.203...
> Connected to ftp.obsd.si.
> 220 nina.kerberos.si FTP server ready.
> 331 Guest login ok, send your email address as password.
> 230 Guest login ok, access restrictions apply.
> Remote system type is UNIX.
> Using binary mode to transfer files.
> 200 Type set to I.
> 250 CWD command successful.
> Retrieving pub/OpenBSD/snapshots/armv7/miniroot-cubie-60.fs
> local: miniroot-cubie-60.fs remote: miniroot-cubie-60.fs
> 150 Opening BINARY mode data connection for 'miniroot-cubie-60.fs'
> (18874368 bytes).
> 100% |**************************************************| 18432 KB
> 00:18 ETA
> 226 Transfer complete.
> 18874368 bytes received in 18.17 seconds (1014.66 KB/s)
> 221 Goodbye.
> $ sha256 -c SHA256
> sha256: cannot open BOOTARM.EFI: No such file or directory
> (SHA256) BOOTARM.EFI: MISSING
> sha256: cannot open BUILDINFO: No such file or directory
> (SHA256) BUILDINFO: MISSING
> sha256: cannot open INSTALL.armv7: No such file or directory
> (SHA256) INSTALL.armv7: MISSING
> sha256: cannot open base60.tgz: No such file or directory
> (SHA256) base60.tgz: MISSING
> sha256: cannot open bsd: No such file or directory
> (SHA256) bsd: MISSING
> sha256: cannot open bsd.rd: No such file or directory
> (SHA256) bsd.rd: MISSING
> sha256: cannot open comp60.tgz: No such file or directory
> (SHA256) comp60.tgz: MISSING
> sha256: cannot open game60.tgz: No such file or directory
> (SHA256) game60.tgz: MISSING
> sha256: cannot open man60.tgz: No such file or directory
> (SHA256) man60.tgz: MISSING
> sha256: cannot open miniroot-am335x-60.fs: No such file or directory
> (SHA256) miniroot-am335x-60.fs: MISSING
> sha256: cannot open miniroot-beagle-60.fs: No such file or directory
> (SHA256) miniroot-beagle-60.fs: MISSING
> (SHA256) miniroot-cubie-60.fs: OK
> sha256: cannot open miniroot-cubox-60.fs: No such file or directory
> (SHA256) miniroot-cubox-60.fs: MISSING
> sha256: cannot open miniroot-nitrogen-60.fs: No such file or directory
> (SHA256) miniroot-nitrogen-60.fs: MISSING
> sha256: cannot open miniroot-panda-60.fs: No such file or directory
> (SHA256) miniroot-panda-60.fs: MISSING
> sha256: cannot open miniroot-wandboard-60.fs: No such file or directory
> (SHA256) miniroot-wandboard-60.fs: MISSING
> sha256: cannot open xbase60.tgz: No such file or directory
> (SHA256) xbase60.tgz: MISSING
> sha256: cannot open xfont60.tgz: No such file or directory
> (SHA256) xfont60.tgz: MISSING
> sha256: cannot open xserv60.tgz: No such file or directory
> (SHA256) xserv60.tgz: MISSING
> sha256: cannot open xshare60.tgz: No such file or directory
> (SHA256) xshare60.tgz: MISSING
> $ sha256 -c SHA256 | grep 'OK'
> sha256: cannot open BOOTARM.EFI: No such file or directory
> sha256: cannot open BUILDINFO: No such file or directory
> sha256: cannot open INSTALL.armv7: No such file or directory
> sha256: cannot open base60.tgz: No such file or directory
> sha256: cannot open bsd: No such file or directory
> sha256: cannot open bsd.rd: No such file or directory
> sha256: cannot open comp60.tgz: No such file or directory
> sha256: cannot open game60.tgz: No such file or directory
> sha256: cannot open man60.tgz: No such file or directory
> sha256: cannot open miniroot-am335x-60.fs: No such file or directory
> sha256: cannot open miniroot-beagle-60.fs: No such file or directory
> sha256: cannot open miniroot-cubox-60.fs: No such file or directory
> sha256: cannot open miniroot-nitrogen-60.fs: No such file or directory
> sha256: cannot open miniroot-panda-60.fs: No such file or directory
> sha256: cannot open miniroot-wandboard-60.fs: No such file or directory
> sha256: cannot open xbase60.tgz: No such file or directory
> sha256: cannot open xfont60.tgz: No such file or directory
> sha256: cannot open xserv60.tgz: No such file or directory
> sha256: cannot open xshare60.tgz: No such file or directory
> (SHA256) miniroot-cubie-60.fs: OK
> gnify/openbsd-60-base.pub.-xbSHA256.sig.siSH <
> Signature Verified
> miniroot-cubie-60.fs: OK
> BOOTARM.EFI: FAIL
> miniroot-beagle-60.fs: FAIL
> bsd: FAIL
> bsd.rd: FAIL
> miniroot-cubox-60.fs: FAIL
> game60.tgz: FAIL
> comp60.tgz: FAIL
> miniroot-nitrogen-60.fs: FAIL
> xserv60.tgz: FAIL
> miniroot-am335x-60.fs: FAIL
> xshare60.tgz: FAIL
> xbase60.tgz: FAIL
> base60.tgz: FAIL
> miniroot-panda-60.fs: FAIL
> xfont60.tgz: FAIL
> man60.tgz: FAIL
> BUILDINFO: FAIL
> miniroot-wandboard-60.fs: FAIL
> INSTALL.armv7: FAIL
> $ signify -C -p /etc/signify/openbsd-60-base.pub -x SHA256.sig | grep 'OK'
> miniroot-cubie-60.fs: OK
> BOOTARM.EFI: FAIL
> miniroot-beagle-60.fs: FAIL
> bsd: FAIL
> bsd.rd: FAIL
> miniroot-cubox-60.fs: FAIL
> game60.tgz: FAIL
> comp60.tgz: FAIL
> miniroot-nitrogen-60.fs: FAIL
> xserv60.tgz: FAIL
> miniroot-am335x-60.fs: FAIL
> xshare60.tgz: FAIL
> xbase60.tgz: FAIL
> base60.tgz: FAIL
> miniroot-panda-60.fs: FAIL
> xfont60.tgz: FAIL
> man60.tgz: FAIL
> BUILDINFO: FAIL
> miniroot-wandboard-60.fs: FAIL
> INSTALL.armv7: FAIL
> oasovnconfigfvnd0nminiroot-cubie-60.fs <
> $ doas dd if=/usr/local/share/u-boot/AananaPr
> A10-OLinuXino-Lime/ A20-OLinuXino-Lime/ A20-OLinuXino_MICRO/
> A10s-OLinuXino-M/ A20-OLinuXino-Lime2/
> ot/Bananapro/u-boot-sunxi-with-spl.binaof=/dev/rvnd0c-bs=1024 seek=8
> <
> 476+1 records in
> 476+1 records out
> 488235 bytes transferred in 0.034 secs (14271287 bytes/sec)
> $ disklabel vnd0
> disklabel: ioctl DIOCGDINFO: Operation not permitted
> $ doas disklabel vnd0
> # /dev/rvnd0c:
> type: vnd
> disk: vnd device
> label: fictitious
> duid: b7b29d6a08b186c2
> flags:
> bytes/sector: 512
> sectors/track: 256
> tracks/cylinder: 16
> sectors/cylinder: 4096
> cylinders: 9
> total sectors: 36864
> boundstart: 6144
> boundend: 36864
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 30720 6144 4.2BSD 2048 16384 240
> c: 36864 0 unused
> i: 4096 2048 MSDOS
> $ doas mount /dev/vnd0i /mnt/usb
> $ ls -lh /mnt/usb
> total 80
> drwxr-xr-x 1 root wheel 4.0K Oct 30 01:32 efi
> -rw-r--r-- 1 root wheel 33.4K Oct 30 01:32 sun7i-a20-cubieboard2.dtb
> $rmo/mnt/usb/sun7i-a20-cubieboard2.dtb <
> $ lsa-lhm/mnt/usbb/sun7i-a20-cubieboard2.dtb
> total 8
> drwxr-xr-x 1 root wheel 4.0K Oct 30 01:32 efi
> $ doas cp /usr/local/share/dtb/arm
> arm/ arm64/
> tb/arm/sun7i-a20-bananapro.dtbd/mnt/usbusn20-bananapr <
> $ lsa-lhp/mnt/usbcal/share/dtb/arm/sun7i-a20-bananapro.dtb /mnt/usb
> total 80
> drwxr-xr-x 1 root wheel 4.0K Oct 30 01:32 efi
> -rw-r--r-- 1 root wheel 33.6K Oct 30 10:37 sun7i-a20-bananapro.dtb
> $ doas umount /mnt/usb
> $ doas vnconfig -u vnd0
> $ ls -lh
> total 36948
> -rw-r--r-- 1 doasuser doasuser 1.8K Oct 30 05:21 SHA256
> -rw-r--r-- 1 doasuser doasuser 1.9K Oct 30 05:21 SHA256.sig
> -rw-r--r-- 1 doasuser doasuser 18.0M Oct 30 10:37 miniroot-cubie-60.fs
> -rw-r--r-- 1 doasuser doasuser 20.8K Oct 30 10:39 typescript
> $ doas if=miniroot-cubie-60.fs of=/dev/rsd1c bs=1024
> doas: if=miniroot-cubie-60.fs: command not found
> $ doas ddiif=miniroot-cubie-60.fsoof=/dev/rsd1cbbs=1024
> 18432+0 records in
> 18432+0 records out
> 18874368 bytes transferred in 15.508 secs (1217046 bytes/sec)
> $ cu -l cuaU0 -s 115200
> cu: open("/dev/cuaU0"): Permission denied
> $ whoami
> doasuser
> $ doas cu -l cuaU0 -s 115200
> Connected to /dev/cuaU0 (speed 115200)
>
> U-Boot SPL 2016.09 (Sep 20 2016 - 02:39:19)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
>
> U-Boot 2016.09 (Sep 20 2016 - 02:39:19 -0600) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: LeMaker Banana Pro
> I2C: ready
> DRAM: 1 GiB
> MMC: SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
>
> Setting up a 720x576i composite-pal console (overscan 32x20)
> In: serial
> Out: vga
> Err: vga
> SCSI: SATA link 0 timeout.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> Net: eth0: ethernet@01c50000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> reading /sun7i-a20-bananapro.dtb
> 34451 bytes read in 29 ms (1.1 MiB/s)
> Found EFI removable media binary efi/boot/bootarm.efi
> reading efi/boot/bootarm.efi
> 64684 bytes read in 40 ms (1.5 MiB/s)
> ## Starting EFI application at 0x42000000 ...
> CACHE: Misaligned operation at range [79f1d000, 79f2ccac]
> Scanning disks on scsi...
> Scanning disks on usb...
> Scanning disks on mmc...
> MMC Device 1 not found
> MMC Device 2 not found
> MMC Device 3 not found
> Found 6 disks
> >> OpenBSD/armv7 BOOTARM 0.5
> boot>
> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2138360+7972148+442776 [80+310912+150523]=0xa87334
>
> OpenBSD/armv7 booting ...
> arg0 0xc0d87334 arg1 0x0 arg2 0x48000000
> Allocating page tables
> freestart = 0x40d88000, free_pages = 258274 (0x0003f0e2)
> IRQ stack: p0x40db6000 v0xc0db6000
> ABT stack: p0x40db7000 v0xc0db7000
> UND stack: p0x40db8000 v0xc0db8000
> SVC stack: p0x40db9000 v0xc0db9000
> Creating L1 page table at 0x40d88000
> Mapping kernel
> Constructing L2 page tables
> undefined page pmap board type: 0
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2016 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
> OpenBSD 6.0-current (RAMDISK) #0: Sat Oct 29 17:32:38 MDT 2016
> dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
> real mem = 1072078848 (1022MB)
> avail mem = 1037021184 (988MB)
>
> mainbus0 at root: LeMaker Banana Pro
> cpu0 at mainbus0: ARM Cortex A7 rev 4 (ARMv7 core)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache
> cortex0 at mainbus0
> agtimer0 at mainbus0: tick rate 24000 KHz
> sxiccmu0 at mainbus0
> simplebus0 at mainbus0: "soc"
> sxipio0 at simplebus0: 175 pins
> sximmc0 at simplebus0
> sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
> sximmc1 at simplebus0
> sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
> ehci0 at simplebus0
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Allwinner EHCI root hub" rev
> 2.00/1.00 addr 1
> sxiahci0 at simplebus0: AHCI 1.1
> scsibus0 at sxiahci0: 32 targets
> ehci1 at simplebus0
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Allwinner EHCI root hub" rev
> 2.00/1.00 addr 1
> sxidog0 at simplebus0
> sxirtc0 at simplebus0
> com0 at simplebus0: ns16550, no working fifo
> com0: console
> com1 at simplebus0: ns16550, no working fifo
> com2 at simplebus0: ns16550, no working fifo
> dwge0 at simplebus0
> dwge0: Ethernet address: 02:17:04:40:c0:cc
> rgephy0 at dwge0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
> ampintc0 at simplebus0 nirq 160
> gpio0 at sxipio0: 18 pins
> gpio1 at sxipio0: 24 pins
> gpio2 at sxipio0: 25 pins
> gpio3 at sxipio0: 28 pins
> gpio4 at sxipio0: 12 pins
> gpio5 at sxipio0: 6 pins
> gpio6 at sxipio0: 12 pins
> gpio7 at sxipio0: 28 pins
> gpio8 at sxipio0: 22 pins
> sximmc0: timeout updating clock
> (manufacturer 0x2d0, product 0xa962)at sdmmc1 function 1 not configured
> (manufacturer 0x2d0, product 0xa962)at sdmmc1 function 2 not configured
> sximmc0: timeout updating clock
> sximmc0: timeout updating clock
> sximmc0: timeout updating clock
> sximmc0: timeout updating clock
> sximmc0: timeout updating clock
> sdmmc0: can't enable card
> sximmc0: timeout updating clock
> boot device: lookup 'sd0a:/bsd' failed.
> root on rd0a swap on rd0b dump on rd0b
> WARNING: clock lost 17103 days
> WARNING: CHECK AND RESET THE DATE!
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/armv7 6.0 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i
> At any prompt except password prompts you can escape to a shell by
> typing '!'. Default answers are shown in []'s and are selected by
> pressing RETURN. You can exit this program at any time by pressing
> Control-C, but this can leave your system in an inconsistent state.
>
> Terminal type? [vt220]
> System hostname? (short form, e.g. 'foo') banana
>
> Available network interfaces are: dwge0.
> Which network interface do you wish to configure? (or 'done') [dwge0]
> IPv4 address for dwge0? (or 'dhcp' or 'none') [dhcp]
> DHCPDISCOVER on dwge0 - interval 1
> DHCPOFFER from 192.168.1.1 (a4:79:47:e5:05:32)
> DHCPREQUEST on dwge0 to 255.255.255.255
> DHCPACK from 192.168.1.1 (a4:79:47:e5:05:32)
> bound to 192.168.1.2 -- renewal in 43200 seconds.
> IPv6 address for dwge0? (or 'rtsol' or 'none') [none]
> Available network interfaces are: dwge0.
> Which network interface do you wish to configure? (or 'done') [done]
> Using DNS domainname my.domain
> Using DNS nameservers at 192.168.1.1 192.168.1.1
>
> Password for root account? (will not echo)
> Password for root account? (again)
> Start sshd(8) by default? [yes]
> Setup a user? (enter a lower-case loginname, or 'no') [no]
> Since no user was setup, root logins via sshd(8) might be useful.
> WARNING: root is targeted by password guessing attacks, pubkeys are safer.
> Allow root ssh login? (yes, no, prohibit-password) [no]
> What timezone are you in? ('?' for list) [Europe/Belgrade]
>
> Available disks are: none.
> Which disk is the root disk? ('?' for details) ?
> Available disks are: none.
> Which disk is the root disk? ('?' for details) ^C
>
> # halt
> syncing disks... done
> The operating system has halted.
> Please press any key to reboot.
>
> Killed
> $ exit
>
> Script done on Sun Oct 30 10:46:35 2016
>
> ===
>
> On Sun, Oct 30, 2016 at 8:21 AM, Jonathan Gray <j...@jsg.id.au> wrote:
>
>> ommmc is for omap not sunxi. sximmc is the sunxi equivalent.
>>
>> sximmc0: timeout updating clock
>> sximmc0: timeout updating clock
>> sximmc0: timeout updating clock
>> sximmc0: timeout updating clock
>> sximmc0: timeout updating clock
>> sximmc0: timeout updating clock
>> sdmmc0: can't enable card
>> sximmc0: timeout updating clock
>>
>> If the cause of that were found and fixed, sd0 would attach.
>> sximmc works on other a20 based systems, it isn't clear what
>> makes this one different besides having multiple sximmc devices.
>>
>> On Sun, Oct 30, 2016 at 08:09:24AM +0100, soko.tica wrote:
>> > It seems that "the mistery" is solved - OpenBSD doesn't have support for
>> > ommc http://man.openbsd.org/OpenBSD-current/man4/armv7/ommmc.4 on sunxi
>> > https://www.openbsd.org/armv7.html
>> >
>> > Once the miniroot is written to usb stick it is able to install on the
>> same
>> > usb stick.
>> >
>> > In the case I am still wrong about this, don't be shy to write it here,
>> > someone might read it in future.
>> >
>> > Regards,
>> >
>> > Soko Tica
>> >
>> > On Sat, Oct 29, 2016 at 10:19 PM, soko.tica <soko.t...@gmail.com>
>> wrote:
>> >
>> > > Hello,
>> > >
>> > > I have managed to successfully install -current on BananaPro
>> (allegedly
>> > > the same board as BananaPi plus wi-fi), but the boot can't be
>> completed
>> > > because
>> > > "boot device: lookup 'sd0a:/bsd' failed"
>> > > although it was initially found (as shown in the typescript bellow).
>> > >
>> > > I performed the install(s) from a SD card plugged into micro card
>> slot to
>> > > another SD card plugged into usb card reader. I did edit partition
>> sizes
>> > > suggested by autopartition. Upon completing the install I place the
>> target
>> > > SD card into the micro card slot and try to boot.
>> > >
>> > > Please advise if I am missing something obvious.
>> > >
>> > > Output of the typescript
>> > > ========================
>> > > U-Boot 2016.09 (Sep 20 2016 - 02:39:19 -0600) Allwinner Technology
>> > >
>> > > CPU: Allwinner A20 (SUN7I)
>> > > Model: LeMaker Banana Pro
>> > > I2C: ready
>> > > DRAM: 1 GiB
>> > > MMC: SUNXI SD/MMC: 0
>> > > *** Warning - bad CRC, using default environment
>> > >
>> > > Setting up a 720x576i composite-pal console (overscan 32x20)
>> > > In: serial
>> > > Out: vga
>> > > Err: vga
>> > > SCSI: SATA link 0 timeout.
>> > > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>> > > flags: ncq stag pm led clo only pmp pio slum part ccc apst
>> > > Net: eth0: ethernet@01c50000
>> > > starting USB...
>> > > USB0: USB EHCI 1.00
>> > > USB1: USB OHCI 1.0
>> > > USB2: USB EHCI 1.00
>> > > USB3: USB OHCI 1.0
>> > > scanning bus 0 for devices... 1 USB Device(s) found
>> > > scanning bus 2 for devices... 1 USB Device(s) found
>> > > Hit any key to stop autoboot: 0
>> > > switch to partitions #0, OK
>> > > mmc0 is current device
>> > > Scanning mmc 0:1...
>> > > reading /sun7i-a20-bananapro.dtb
>> > > 31159 bytes read in 30 ms (1013.7 KiB/s)
>> > > Found EFI removable media binary efi/boot/bootarm.efi
>> > > reading efi/boot/bootarm.efi
>> > > 64684 bytes read in 41 ms (1.5 MiB/s)
>> > > ## Starting EFI application at 0x42000000 ...
>> > > CACHE: Misaligned operation at range [79f1d000, 79f2ccac]
>> > > Scanning disks on scsi...
>> > > Scanning disks on usb...
>> > > Scanning disks on mmc...
>> > > MMC Device 1 not found
>> > > MMC Device 2 not found
>> > > MMC Device 3 not found
>> > > Found 6 disks
>> > > >> OpenBSD/armv7 BOOTARM 0.5
>> > > boot>
>> > > cannot open sd0a:/etc/random.seed: No such file or directory
>> > > booting sd0a:/bsd: 2138412+7972140+442552 [80+310912+150523]=0xa8724c
>> > >
>> > > OpenBSD/armv7 booting ...
>> > > arg0 0xc0d8724c arg1 0x0 arg2 0x48000000
>> > > Allocating page tables
>> > > freestart = 0x40d88000, free_pages = 258274 (0x0003f0e2)
>> > > IRQ stack: p0x40db6000 v0xc0db6000
>> > > ABT stack: p0x40db7000 v0xc0db7000
>> > > UND stack: p0x40db8000 v0xc0db8000
>> > > SVC stack: p0x40db9000 v0xc0db9000
>> > > Creating L1 page table at 0x40d88000
>> > > Mapping kernel
>> > > Constructing L2 page tables
>> > > undefined page pmap board type: 0
>> > > Copyright (c) 1982, 1986, 1989, 1991, 1993
>> > > The Regents of the University of California. All rights reserved.
>> > > Copyright (c) 1995-2016 OpenBSD. All rights reserved.
>> > > https://www.OpenBSD.org
>> > >
>> > > OpenBSD 6.0-current (RAMDISK) #0: Tue Oct 25 02:52:36 MDT 2016
>> > > dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
>> > > real mem = 1072078848 (1022MB)
>> > > avail mem = 1037025280 (988MB)
>> > > mainbus0 at root: LeMaker Banana Pro
>> > > cpu0 at mainbus0: ARM Cortex A7 rev 4 (ARMv7 core)
>> > > cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
>> > > cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache
>> > > cortex0 at mainbus0
>> > > agtimer0 at mainbus0: tick rate 24000 KHz
>> > > sxiccmu0 at mainbus0
>> > > simplebus0 at mainbus0: "soc"
>> > > sxipio0 at simplebus0: 175 pins
>> > > sximmc0 at simplebus0
>> > > sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
>> > > sximmc1 at simplebus0
>> > > sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
>> > > ehci0 at simplebus0
>> > > usb0 at ehci0: USB revision 2.0
>> > > uhub0 at usb0 configuration 1 interface 0 "Allwinner EHCI root hub"
>> rev
>> > > 2.00/1.00 addr 1
>> > > sxiahci0 at simplebus0: AHCI 1.1
>> > > scsibus0 at sxiahci0: 32 targets
>> > > ehci1 at simplebus0
>> > > usb1 at ehci1: USB revision 2.0
>> > > uhub1 at usb1 configuration 1 interface 0 "Allwinner EHCI root hub"
>> rev
>> > > 2.00/1.00 addr 1
>> > > sxidog0 at simplebus0
>> > > sxirtc0 at simplebus0
>> > > com0 at simplebus0: ns16550, no working fifo
>> > > com0: console
>> > > com1 at simplebus0: ns16550, no working fifo
>> > > com2 at simplebus0: ns16550, no working fifo
>> > > dwge0 at simplebus0
>> > > dwge0: Ethernet address: 02:17:04:40:c0:cc
>> > > rgephy0 at dwge0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
>> > > ampintc0 at simplebus0 nirq 160
>> > > gpio0 at sxipio0: 18 pins
>> > > gpio1 at sxipio0: 24 pins
>> > > gpio2 at sxipio0: 25 pins
>> > > gpio3 at sxipio0: 28 pins
>> > > gpio4 at sxipio0: 12 pins
>> > > gpio5 at sxipio0: 6 pins
>> > > gpio6 at sxipio0: 12 pins
>> > > gpio7 at sxipio0: 28 pins
>> > > gpio8 at sxipio0: 22 pins
>> > > sximmc0: timeout updating clock
>> > > (manufacturer 0x2d0, product 0xa962)at sdmmc1 function 1 not
>> configured
>> > > (manufacturer 0x2d0, product 0xa962)at sdmmc1 function 2 not
>> configured
>> > > sximmc0: timeout updating clock
>> > > sximmc0: timeout updating clock
>> > > sximmc0: timeout updating clock
>> > > sximmc0: timeout updating clock
>> > > sximmc0: timeout updating clock
>> > > sdmmc0: can't enable card
>> > > sximmc0: timeout updating clock
>> > > boot device: lookup 'sd0a:/bsd' failed.
>> > > root on rd0a swap on rd0b dump on rd0b
>> > > WARNING: clock lost 17099 days
>> > > WARNING: CHECK AND RESET THE DATE!
>> > > erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>> > >
>> > > ===========================
>> > >
>> > > Several times I also tried with interrupting the boot and
>> > >
>> > > => run findfdt
>> > > => load mmc 0:1 ${fdt_addr_r} ${fdtfile}
>> > > => load mmc 0:1 ${kernel_addr_r} efi/boot/bootarm.efi
>> > > => bootefi ${kernel_addr_r} ${fdt_addr_r}
>> > >
>> > > as per the instructions ftp://ftp.obsd.si/pub/OpenBSD/
>> > > snapshots/armv7/INSTALL.armv7
>> > >
>> > > But with the same result.
>> > >
>> > > Thanks in advance,
>> > >
>> > > Regards,
>> > >
>> > > Soko Tica
>> > >
>>
>
>
