There is that. And I have seen issues with water ingress on the MImosa ones, specifically. hard to say if they blew up for now reason or for a reason though...
On Thu, Oct 7, 2021 at 12:53 PM Adam Moffett <[email protected]> wrote: > I would care if it blew up for no reason or if there was water ingress > through a crummy seal. > On 10/7/2021 1:45 PM, Mathew Howard wrote: > > Yeah, I don't really see a good reason to not just use a surge suppressor. > Cheap-rate Ubiquiti or Mimosa suppressors can be had for ~$10... and you > obviously aren't going to care much about the quality of the actual surge > suppression in this case anyway. > > On Thu, Oct 7, 2021 at 12:28 PM Adam Moffett <[email protected]> wrote: > >> I guess both indoor and outdoor? Bonding for R56 compliance and also >> for maybe getting RF noise to ground without going through our switch. >> >> I suppose indoor we can hack it, and outdoor might as well use the surge >> suppressor. I'd imagine the housing and glands and such is more money >> than the PCB so there's nothing gained by paring it down. >> >> -Adam >> >> >> >> On 10/7/2021 12:56 PM, Chuck McCown via AF wrote: >> > Trim back the jacket and attach a ground wire. Are you wanting >> > something for outdoor mounting? It would have to be two shielded >> > jacks and you would have to use shielded plugs on it. So two jacks on >> > a pcb and then some kind of housing. >> > >> > -----Original Message----- From: Adam Moffett >> > Sent: Thursday, October 7, 2021 10:45 AM >> > To: AnimalFarm Microwave Users Group >> > Subject: [AFMUG] Ethernet ground block >> > >> > Is there an equivalent to the cable TV ground blocks but for Cat5? >> > >> > I would basically look like a coupler with a ground wire attached to the >> > shield. Much more basic than a surge suppressor. >> > >> > -Adam >> > >> > >> > >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
