What are the sync options for 450m? Poe+sync or aux port? No on-board gps for self sync??
On Fri, Sep 25, 2020, 9:57 AM Josh Baird <joshba...@gmail.com> wrote: > Or just use a cnPulse/SyncBox or something like that at the top of the > tower next to the radio.. so, you aren't running CAT5 all the way up your > tower. > > On Fri, Sep 25, 2020 at 12:53 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> Do you mean use fiber for ethernet connectivity but run cat5 for sync? >> >> Josh Luthman >> 24/7 Help Desk: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> On Fri, Sep 25, 2020 at 11:55 AM Gino A. Villarini <g...@aeronetpr.com> >> wrote: >> >>> You can use single sync solutions per AP, so no Ethernet runs >>> >>> >>> >>> *Gino* >>> *Villarini *Founder/President >>> @gvillarini >>> t: 787.273.4143 Ext. 204 >>> [image: aeronet-logo] <http://www.aeronetpr.com/> [image: inc500] >>> <https://www.inc.com/profile/aeronet> [image: fb-logo] >>> <https://www.facebook.com/aeronetpr/> [image: insta-logo] >>> <https://www.instagram.com/aeronetpr/?hl=en> [image: in-logo] >>> <https://www.linkedin.com/company/aeronet-broadband-corp> [image: >>> tw-logo] >>> <https://twitter.com/AeroNetPR?ref_src=twsrc%5Egoogle%7Ctwcamp%5Eserp%7Ctwgr%5Eauthor> >>> [image: yt-logo] >>> <https://www.youtube.com/channel/UCr2Q9WBrAYVm3Fn970Jd6VA> >>> www.aeronetpr.com | Metro Office Park #18 Suite 304 Guaynabo, PR 00968 >>> >>> *From: *AF <af-boun...@af.afmug.com> on behalf of Josh Luthman < >>> j...@imaginenetworksllc.com> >>> *Reply-To: *AnimalFarm Microwave Users Group <af@af.afmug.com> >>> *Date: *Friday, September 25, 2020 at 10:05 AM >>> *To: *AnimalFarm Microwave Users Group <af@af.afmug.com> >>> *Subject: *Re: [AFMUG] Power for 450M via PacketFlux or Rectifier? >>> >>> >>> >>> I don't need no damn sync. I have a building with more than enough FTB. >>> >>> >>> >>> Josh Luthman >>> 24/7 Help Desk: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> >>> >>> On Fri, Sep 25, 2020 at 9:58 AM Josh Baird <joshba...@gmail.com> wrote: >>> >>> You (we) still need power+sync even if you use fiber.. We're planning on >>> using fiber, too. >>> >>> >>> >>> On Fri, Sep 25, 2020 at 9:53 AM Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>> Forgot all about that massive power requirement. We did DC+fiber to >>> avoid ethernet issues. >>> >>> >>> >>> Josh Luthman >>> 24/7 Help Desk: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> >>> >>> On Thu, Sep 24, 2020 at 2:50 PM Ken Hohhof <af...@kwisp.com> wrote: >>> >>> I think he said 3 GHz 450m which requires direct DC power because it >>> uses like 1.21 gigawatts. >>> >>> >>> >>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >>> *Sent:* Thursday, September 24, 2020 1:28 PM >>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>> *Subject:* Re: [AFMUG] Power for 450M via PacketFlux or Rectifier? >>> >>> >>> >>> If you need sync...power it over that too. >>> >>> >>> >>> In my case, we don't need sync on our deployment so we went fiber + DC. >>> No sync - we've got a bomb shelter building for a good bit of shielding. >>> >>> >>> >>> Josh Luthman >>> 24/7 Help Desk: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> >>> >>> On Thu, Sep 24, 2020 at 1:57 PM Ken Hohhof <af...@kwisp.com> wrote: >>> >>> I can’t remember last time I power cycled an AP, it’s been years. >>> >>> >>> >>> Only time would be if I did something stupid and needed to do the quick >>> power cycle to get into the Recovery Console. Usually that wouldn’t be an >>> AP that’s in service, but one from the used pile that I’m planning to >>> redeploy but I didn’t label where it came from. >>> >>> >>> >>> Sometimes after a year or two uptime some of the Ubiquiti stuff will go >>> off to Lalaland and need a reboot, I had to do an old Powerbridge the other >>> day, but I could still reboot it from the GUI. I had an old >>> Karlnet/YDI/Terabeam/Proxim backhaul radio that needed to be power cycled >>> regularly but that was 15 years ago and it got replaced with a PTP500 which >>> has now been replaced with a PTP820. >>> >>> >>> >>> >>> >>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Sean Heskett >>> *Sent:* Thursday, September 24, 2020 12:30 PM >>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>> *Subject:* Re: [AFMUG] Power for 450M via PacketFlux or Rectifier? >>> >>> >>> >>> Either way is fine, we’ve chosen to do it in the PacketFlux RI so that >>> everything is standardized across our towers. Support staff and field >>> techs know that ALL APs get power from a rack injector...so when problems >>> happen look there and try a reboot. >>> >>> >>> >>> -Sean >>> >>> >>> >>> >>> >>> On Thu, Sep 24, 2020 at 9:18 AM Josh Baird <joshba...@gmail.com> wrote: >>> >>> We're deploying our first 450M gear soon. This site will have a +48VDC >>> ICT rectifier solution and DC distribution (managed). >>> >>> >>> >>> We're going to be using a PacketFlux RackInkjector w/ Cambium Sync >>> modules to provide sync to the 450M 3ghz radios. We could load a PDU >>> module in the RackInjector as well to provide power to them. >>> Alternatively, we could power them directly off of the ICT managed >>> distribution. >>> >>> >>> >>> Both solutions are managed (can turn them on/off via IP). Is there any >>> reason to use the PacketFlux PDU module over the DC distribution panel in >>> this scenario? >>> >>> >>> >>> Cheers, >>> >>> >>> >>> Josh >>> >>> >>> >>> -- >>> >>> AF mailing list >>> >>> AF@af.afmug.com >>> >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
