I see that everyone else is as confused as I am about some of these PTP Radios.
I'm about 100% certain that the 900Mhz PTP is be the AP hardware, in which case it should support any timing method you throw at it: Canopy sync, cambium sync, or aux port sync. For a single radio,the Syncbox Aux Port is probably the least expensive option, although I personally would throw the combination of a syncbox basic, sitemonitor base 3, and powerinjector+canopy sync at it as that will allow you to power and control any other radios at the site and gain temperature and telemetry for the site. On the syncbox only option, The Syncbox Aux Port get's its power from the radio, just turn on uGPS power in the AP, and run a cat5 from the aux port to this unit. If this isn't based on the AP hardware, then we need to go to plan B, which will probably be a timing port device, but I'll need to research more. On Thu, Jun 18, 2020 at 12:30 PM <cg...@graytechsoftware.com> wrote: > I have a site where I need sync only for a PTP 450i 900 MHz AP. Any > recommendation for which PacketFlux injector to use? > > [I have some old syncpipes, but they are not new enough.] > > Thank you, Chris > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- - Forrest
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
